Get matched with top marble restoration pros in Shaw, MS

Engineered stone is nonporous, unlike natural stone, and does not need to be sealed. You do not have to worry about etching or bacterial growth. It is more durable than natural stone and concrete, as well as highly heat resistant. Engineered stone is easy to clean and maintain. You can wipe it down with warm water and soap. Use a non-scratch scrub pad for stains and avoid any harsh cleaners. Engineered stone can even be eco-friendly, with some manufacturers using waste byproducts or organic resins.

It is advisable to have stone countertops inspected every few years, especially if damage is noticed. Regular maintenance and inspection help catch and resolve issues early, extending the countertops' lifespan.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Clorox wipes contain bleach, which is unsafe for use on quartz countertops. When used over time, the bleach will damage the countertop surface and cause it to become discolored or damaged. Instead of Clorox wipes, use a pH-neutral multipurpose solution and clean the surface gently using a soft microfiber cloth.