Get matched with top metal fabricators and restorers in Osyka, MS

The average roof requires about 17 metal sheets, but that varies according to house size and roof style. Each roofing sheet takes about five minutes to measure and cut, though this depends on your level of experience. If your roof has a steep slope, gables, and skylights, for example, it may require extra sheets to account for waste. Roofs with a steep slope over 3:12 typically require more sheets because the pitch adds extra inches. How much exactly you will need depends on the height versus the width of the roof. If you are unsure of the calculations, check with a local roofing professional.

Storing brass properly, cleaning it regularly, avoiding excess handling, and making sure to only use gentle, non-abrasive cleaning materials can all help extend the life of brass. Storing little-used brass items in airtight, water-tight containers will help prevent oxidation and water damage. For more frequently used items, try not to handle them frequently with bare hands, clean them when they begin showing signs of oxidation or tarnish, and avoid harsh, abrasive cleaners or tools.

Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.