Get matched with top welders in Oakland, MS

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: How much does it cost to hire a metal fabrication professional?

• <div><p>Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.</p></div>

Q: How long does it take to cut up a hot tub?

• <div><p>Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.</p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Oakland, MS?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Oakland, MS

*The Angi rating for Welding companies in Oakland, MS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Oakland, MS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on May 17, 2026

Reviewed in May 2026
They did an amazing job on replacing my roof. The crew was excellent very efficient and quick the workmanship is very high-quality. I would recommend them to anyone there was not a long wait from the moment. I signed a contract. It was just a few days, The supplies was delivered and they were...
Cloud Nine Roofing
Request a quote
Reviewed in January 2026
These guys did a great job of removing the trees I had in my yard it was a tight space and most were big pine trees. But they got them down no problem. James was quick to come out and look at what needed to be done . Gave me a very good price and got started. It took load off my mind I was...
Panola Treeworks, LLC
Request a quote
Reviewed in January 2026
Did a excellent job!! Very much pleased.
Home Complete Solutions LLC
Request a quote
Reviewed in August 2024
Great job repairing my daughters ac. Would recommend him to anyone needing ac repair. Price was affordable and very prompt getting to her home same day. Will definitely use them again!
Honest A/C, LLC
Request a quote
Reviewed in October 2023
My grandmother hired them to do her carport and to build her a shed. They were very productive and friendly. The structures are exactly how she wanted them and well put together. I would definitely recommend STF Construction if someone is looking for something sturdy and long lasting built.
STF Construction
Request a quote
Reviewed in July 2023
I recommend this individual to everybody that needs a carpenter. I have trouble recommending any body but Joe is the exception to the rule. If you need work done donâ t bother looking any further
Joe breithaupt
Request a quote
Reviewed in February 2023
The Angry Beavers came out and removed a huge old tree that was hollowed out. I hated removing it but it was 20 feet from my house and could have fallen during a bad storm. They made the removal look easy and cleaned up everything when they finished. I was very pleased with the whole process. I...
Angry Beavers Tree Service Company, LLC
Request a quote
Reviewed in September 2022
This was the absolute best experience my wife and I have had with a contractor. Luis and his crew were there every morning ready to work. They took exceptional care to protect all surfaces, clean, sand, and prime all surfaces. The work was outstanding and exactly what we wanted. Nothing was...
Memphis Pro Solutions
Request a quote
Reviewed in August 2022
The company fast and efficiently deliver the scope of work as promised, maintain the health of our trees, they protect our property and trees.
Southern Tree Solutions
Request a quote
Reviewed in May 2022
Great service, timely, and work was done well. Would recommend to others and would hire again
Byrd On The Roof, LLC
Request a quote

Find Welders in Oakland

BRO WELDING LLC

5.0(

)

Serving Oakland, MS and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"Good welder and fitter. Worked on heavy equipment and did great."

Response time2 days

Request Quote

Luke Hudson Mobile Welding

5.0(

)

Serving Oakland, MS and surrounding areas

In business since 2025

Free estimates

Emergency services offered

"A true professional that shows skill in what he is doing at a competitive price. There couldn't have been a better job done on the work that was needed. I would definitely recommend to anyone needing welding done!"

28 neighbors recently requested a quote

Request Quote

Dirty Works Construction & Harris's Mobile Welding

2.8(

)

Serving Oakland, MS and surrounding areas

In business since 2012

Free estimates

Credit card accepted

"Very professional. Would hire again."

Response time2 days

Recommended by80%of homeowners

Serving Oakland, MS and surrounding areas

In business since 2024

Credit card accepted

"Noah is a very professional young man that has a great understanding on how to perfect a existing mechanical operation. We have also used him to design new electrical conveyors & sorters for the packing operation. lots of talent with this guy! Give him a shout."

Recommended by100%of homeowners

Request Quote

Booker's Custom Welding & Fencing

5.0(

)

Serving Oakland, MS and surrounding areas

In business since 2000

Free estimates

Credit card accepted

"He does good work. Very friendly and everything he does is done the right way in a timely manner."

Response time2 hrs

Recommended by100%of homeowners

Request Quote

Dan B. Welding

New to Angi

Serving Oakland, MS and surrounding areas

In business since 2001

Free estimates

Credit card accepted

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job. Call today for a free quote!

Serving Oakland, MS and surrounding areas

In business since 2023

Free estimates

Offers commercial services

"The work done for the project was top notch. Not only did they consistently show up on time, but they finished the project early and were willing to accommodate our schedule."

Response time3 hrs

Recommended by100%of homeowners

Request Quote

L&W Welding

New to Angi

Serving Oakland, MS and surrounding areas

In business since 2016

Free estimates

Offers commercial services

W&W Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business

Request Quote

Spencer's Welding and Fabrication

4.5(

)

Serving Oakland, MS and surrounding areas

In business since 2021

Free estimates

Emergency services offered

We are a locally owned and operated company. We value honesty and integrity in all aspects of our business. We offer a variety of home improvement services that are customized to each individual project. We pride ourselves on the quality of our work, as well as our commitment to outstanding results. We look forward to building lasting relationships with our clients and guarantee your satisfaction!

Response time1 day

Recommended by100%of homeowners

Request Quote

J & B Welding

New to Angi

Serving Oakland, MS and surrounding areas

In business since 2018

Free estimates

Call J & B Welding, Mississippi's premium welding company. We look forward to helping you with your project. Our friendly staff is here for any questions. Our customers show an extreme appreciation and satisfaction with our work. Don't hesitate, give us a call today. Thank you!

Request Quote

Showing 1-10 of 24

Welding questions, answered by experts

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

The Oakland, MS homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Paige Bennett
•
May 2, 2026May 2, 2026
7 Types of Farm Fencing and How to Choose the Best One
There are a lot of different types of farm fencing. Find the one that’s right for your property with our handy guide.
Jacqueline DeMarco
•
May 2, 2026May 2, 2026
10 Types of Wire Fences for Yards and Farms
If you’re considering adding a wire fence to your property, you have choices. Keep reading for a breakdown of 10 types of wire fences.
Stacy Sare Cohen
•
May 22, 2026May 22, 2026
Melding Art and Skill: How to Hire a Qualified Welder
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.