Get matched with top gas log pros in Hickory Flat, MS

Yes, it can be worth installing a gas fireplace, depending on your home heating needs. The cost to install a gas fireplace can be much lower than the cost to install a comparable wood-burning fireplace. The convenience of starting a fire with the flip of a switch and turning it off just as quickly makes a gas fireplace a big time saver over starting and maintaining a wood-fueled fire. A gas fireplace also does not require ash cleanup or frequent chimney cleaning to remove creosote and other buildup that can lead to chimney fires. Gas fireplaces burn and heat much more cleanly than wood fireplaces.

The cost to move a gas line is around $500 on average or $20 per linear foot . A pro will carefully disconnect the existing gas line and reroute it to its new path. This may involve excavation if the line is underground or drywall work to repair your walls and ceilings. The project will finish with a pressure test to check for leaks and turning the gas line back on.

Yes. There are a variety of standard pipe sizes used in plumbing. The main supply line connecting your home to the street is either 3/4 or 1 inch in diameter. Supply lines are 3/4 inch in diameter. Individual components are 1/2 inch in diameter. Meanwhile, your main drainpipe is often 4 inches wide. Most shower and bathtub drains are 2 inches in diameter, most toilet drains are 3 inches in diameter, and most sink drainpipes are 1 1/4 or 1 ½ inches in diameter.

Modern gas fireplaces are relatively efficient and don't burn excessive amounts of gas, especially compared to older models. A gas fireplace might use between 10,000 to 40,000 BTUs per hour; the total amount of gas used depends on the fireplace's size, heat output, and how often it's in use. To help keep your running costs down, consider using a thermostat and turning off the fireplace when not needed to minimize gas consumption