Get matched with top welders in Blue Mountain, MS

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

• Metal furniture repair: $35–$100

• Pipe repair: $200–$1,000

• Small gates: $550–$750

• Fencing: $1,200–$1,800

• Fabricated sheet metal welding: $750–$2,500

The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it. Some of the most common metals used by welders include:

• Magnesium alloy: $7–$16 per pound

• Low-carbon steel: $11–$12 per pound

• Stainless steel: $13–$15 per pound

• Copper/brass: $24–$29 per pound

• Cast iron: $38–$79 per pound

• Titanium: $60–$85 per pound

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.