Best garage cleaning pros near Belden, MS

Drywalling a garage is a smart decision if you want to protect your garage from fires, moisture damage, and exterior noise. Most garages have flammable supplies that could result in serious damage in the off chance of an accident. Drywall is fire resistant, helping to prevent fires from spreading. Not to mention, drywall can improve the appearance of a dingy, old garage.

The best method for painting a garage door depends on the door's design and the finish you want to achieve. For the most professional-looking finish, especially on doors with panels or intricate details, a paint sprayer is an excellent choice. It can easily get into hard-to-reach places and provide a smooth, even coat.

If you don't have a sprayer, or if your door is flat, a combination of a roller and a brush is the most effective approach. Use a roller for the large, flat sections to cover the area quickly and efficiently. For the best results, experts recommend a roller with a nap between ⅜ and ¾ inches thick; natural fibers can also help ensure an even coat.

A brush is essential for handling the finer details. Use it to paint grooves, angles, small panels, and the edges of the door where you need more control.

Regardless of the tools you use, it's a good idea to step back after the main application to review your work and use a detail brush to touch up any missed spots.

Christmas lights and decorations are prone to heat and humidity damage, so keep this in mind if you store them in the garage. Put the lights in plastic bins with tight-fitting lids to keep moisture out to keep them safe until next year. 

It’s possible to use a torch to melt ice on your garage door, but we don’t recommend it. It’s very easy to bring the flame too close to the door, which can melt the weather stripping or even the garage door itself. You’ll melt ice quickly with a torch, but the damage you’re likely to cause can end up costing you a few hundred dollars to fix, which isn’t worth it. Instead, we recommend pouring hot water over the frozen area or using a less intense heat source, like a hair dryer or space heater.