Best chandelier installation pros near Stanberry, MO

Motion-sensor lights use one watt while on standby and five watts while turned on. They’re usually on for one hour over a 24-hour period, bringing the total wattage to about 28 watts per day. LED lights use around 6.5 to 8 watts while on. If you leave an LED light on all night, with night ranging from 10 to 14 hours, you’re looking at using 65 to 112 watts a night. You can minimally cut your wattage in half by switching to a motion-sensor light.

You will likely need an electrical permit to install outdoor lighting, but it depends on where you live. Some municipalities don’t require a permit for electrical work, but you should call your building department or ask your outdoor lighting installer if a permit will be necessary. Your professional should pull the permits for you, if required, and close them out after the work is done. Either way, you will be responsible for the permit fee, which typically falls between $50 and $150.

Track lighting typically needs to be hardwired, connecting directly to the electrical wiring in your ceiling for a permanent and reliable power source. Hardwiring provides a clean and professional look with no visible cords. However, plug-in track lighting options can be connected to a standard electrical outlet, offering easier installation and flexibility. The choice between hardwired and plug-in track lighting depends on your needs, preferences, and existing electrical setup.

Some outdoor lighting fixtures are easy to install, like solar pathway lights that don’t need connecting to your electrical system. However, other types of outdoor lighting can be challenging to install, especially if it’s part of a larger electrical system. It’s best to work with a trained electrician for high-voltage outdoor lighting. You might also want to work with a landscaper for installing lighting in high or hard-to-reach areas.