Get matched with top concrete driveway pros in Rosebud, MO

The ideal PSI (pounds per square inch) for a pressure washer depends on the surface you are cleaning. For general home use, a pressure washer with a range of 2,000 to 3,000 PSI is recommended and powerful enough for most residential projects.

The specific PSI you should use varies by task:

• High-Pressure Tasks (2,500-3,000 PSI): Tough materials like concrete, stone, masonry, and brick can handle higher pressures. This is suitable for removing stubborn stains from driveways or cleaning graffiti.

• Low-Pressure Tasks (around 600-1,300 PSI): Softer surfaces require a gentler touch to avoid damage. Use a low PSI setting for cleaning wood decks (especially softwoods like pine and cedar), vinyl siding, outdoor furniture, and stucco.

For best results, choose the right nozzle for your surface, such as a 15-degree nozzle for siding or a surface cleaner attachment for driveways. Using an extendable wand can also make the work easier and more ergonomic.

Pressure washing your driveway can prevent cracks in it since it removes grease and oil, which, if left on the driveway for too long, can break down compounds in concrete and asphalt, leading to cracks. It can also help keep driveway weeds, moss, mold, and mildew at bay while boosting your home's curb appeal. 

Whether you need to winterize your pressure washer depends on where you store it. If you can keep it in a relatively warm place with no risk of freezing, you won't need to add antifreeze. However, if the machine will be stored in freezing temperatures, any liquid left in the water pump can freeze, expand, and cause severe damage. To prevent this, add antifreeze to keep it in good condition. While some suggest emptying the machine with compressed air, this can be a tedious process that may not fully drain the liquid. Regardless of storage conditions, it is also good practice to empty the gas chamber and refresh the oil before winter storage.

The best cleaning solution for stamped concrete is a combination of water and mild soap. Dish soap and laundry detergent are good options. For more stubborn stains, you can use an alkaline cleaner that removes oil and grease. In either case, you’ll want to steer clear of abrasive cleaners and harsh chemicals which can damage the concrete.