Can you cut a shipping container apart?

• <div><p>Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Get matched with top welders in Oakland, MO

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: How do I maintain custom or fabricated metal structures?

• <div><p>To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: How long does it take to cut up a hot tub?

• <div><p>Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.</p></div>

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Oakland, MO?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Oakland, MO

*The Angi rating for Welding companies in Oakland, MO is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Oakland, MO is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on December 21, 2025

Reviewed in December 2025
In the past, we had Massey Tuckpointing repair and tuckpoint the brickwork on our rental property. They were polite, arrived on time, matched the mortar and brickwork, cleaned up everything and did a fantastic job without any headaches. Recently, we had them clean and inspect our chimney and...
Massey Tuckpointing & Masonry
Request a quote
Reviewed in May 2025
A previous owner had welded a support bar (assumed) and metal outlets to the steel support post in my residential basement. I finally got around to having this work done and hired Loretto Welding. They did a fantastic job! I am very pleased. The two gentlemen who did the work were pleasant to...
Loretto Welding & Fab
Request a quote
Reviewed in February 2023
CidÃ¢Â Â s guys did a great job repairing some baseboards in our house. The guys were efficient and very nice! Would recommend this company!
CVM Enterprises, Inc.
Request a quote
Reviewed in May 2022
I searched long and hard for a craftsman to replace a 2-piece manual wooden gate with a one-piece custom aluminum gate. Booms Welding impressed me from the start. They were thorough in their bid/quote, came out a second time to answer questions to ensure accuracy and completeness, fabricated a...
Booms Welding Fabrication, LLC
Request a quote
Reviewed in March 2022
Owner was very customer oriented and performed the job in a timely fashion. Although we had refurbished railings rather than having Seven 13 Portable Welding make the railings, they were willing to do the job. Very friendly and professional.
Seven 13 Portable Welding & Metal Works, LLC
Request a quote
Reviewed in October 2021
B&B Masonry did some tuckpointing, waterproofing, and crown repair on my chimney. They did really great work and the clean up was on point as well. Can't recommend them the highly enough as far as their overall work goes. Only minor complaint was the work I had to put in to get on the...
B&B masonry and tuckpointing llc
Request a quote
Reviewed in July 2019
I needed welding on a steel shelf that I made. They were quick and the work was very neat. I was charged the "minimum charge" of $40. I will use them for my next welding needs.
Valley Park Welding
Request a quote
Reviewed in April 2015
The tub was leaking somewhere underneath and the only way to get at it was from underneath, thanks to the builder not providing access at the tub itself. After cutting away a portion of the floor under the tub (first floor master with unfinished basement underneath), the plumber found that some...
Tony LaMartina Plumbing Company Inc
Request a quote
Reviewed in October 2014
Most muffler repair shops would have required replacement of the front pipe and intermediate pipe for at least $300 plus labor. Welding in a chunk of new pipe was quick (20 minutes), economic, and effective. Don's did a great job and was very professional. I highly recommend the shop, especially...
DON'S MUFFLER CLINIC
Request a quote
Reviewed in April 2012
They are very versatile and can do different types of welding.
Des Peres Welding
Request a quote

Find Welders in Oakland

Loretto Welding & Fab

4.9(

)

Serving Oakland, MO and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Emergency services offered

"They have done on site repair of my heavy equipment on several occasions. Always fast to respond, and done well at a fair price"

Response time1 day

30 neighbors recently requested a quote

Recommended by44%of homeowners

Request Quote

Valley Park Welding, LLC

5.0(

)

Serving Oakland, MO and surrounding areas

Approved

In business since 1971

Free estimates

Customers say: Quick response

"I received great value with person care and attention!"

Response time1 day

Recommended by100%of homeowners

Request Quote

Elis Welding

New to Angi

Serving Oakland, MO and surrounding areas

Approved

Free estimates

Small jobs welcome

Credit card accepted

I have been welding since highschool and specialize in structural reinforcement

2 neighbors recently requested a quote

Request Quote

Spring Valley Welding and Fab LLC

New to Angi

Serving Oakland, MO and surrounding areas

Approved

In business since 2025

Free estimates

Offers commercial services

Spring Valley Welding and Fab LLC is here for all of your welding needs! Whether it's a custom fab project or something in the field, we can get you covered for a fair price.

Response time1 hour

3 neighbors recently requested a quote

Request Quote

Wolf Fabrication

New to Angi

Serving Oakland, MO and surrounding areas

Approved

In business since 2015

Free estimates

Offers commercial services

We pride our company on reliability, great communication, integrity and quality work. We are experts in our welding and metal fabrication and will do our best to keep you as educated as we can on your particular task or project. We look forward to working with you.

Response time5 hrs

Request Quote

Next Generation Fabrication

5.0(

)

Serving Oakland, MO and surrounding areas

Approved

In business since 2025

Free estimates

Small jobs welcome

We have a single mission: Complete Customer Satisfaction! We have consistently focused on the needs of our customers, providing personalized attention and a stress-free experience.\nYou will find us to be competitively priced with close attention to the details.\nOur reputation is based on service, safety, and quality, regardless of how large or small the job.\nWe look forward to building a lasting relationship and guarantee your satisfaction!\n\n\nWe accept check or cash

Request Quote

Roper Quality Metal Services, LLC

New to Angi

Serving Oakland, MO and surrounding areas

Approved

In business since 2020

Free estimates

Credit card accepted

Roper Quality Metal Services LLC is committed to excellence, every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business. Call us today!

Serving Oakland, MO and surrounding areas

In business since 2020

Free estimates

Small jobs welcome

"They do great work. I have recommended them in the past and would recommend them to others!"

Response time10 mins

Recommended by100%of homeowners

Serving Oakland, MO and surrounding areas

In business since 2016

Free estimates

Emergency services offered

"Amazing worker and amazing work. Couldn't find another welder to even consider welding the cast iron. He did it beautifully."

Recommended by100%of homeowners

Serving Oakland, MO and surrounding areas

In business since 1990

Free estimates

Credit card accepted

"Jeff was great to work with. Very friendly, transparent and easy to communicate with. I would definitely recommend."

Response time4 hrs

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 48

Welding questions, answered by experts

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

The Oakland, MO homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Mackenzie Sanford
•
May 20, 2026May 20, 2026
How Much Does It Cost to Replace an HVAC TXV Valve in St. Louis, MO? [2026 Data]
When a TXV valve goes bad in your AC, you’ll notice it’s not cooling your home. Read on to learn more about HVAC TXV replacement costs in St. Louis, MO.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Steel Beam Installation
Find who to hire for steel beam installation. Learn who to call, what each pro does, and plan your project with confidence.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Wrought Iron Fence Repair
Discover who to hire to repair a wrought iron fence and handle iron fence repair. Compare pros, see the process, and hire with confidence today.