Top-rated countertop and backsplash pros.

Get matched with top countertop and backsplash pros in Patten, ME

Q: How to tell if a countertop is Formica or laminate?

• <div><p>Formica is a brand of laminate, so all Formica is laminate, but not all laminate is Formica. To identify it, look for a thin, plastic-like surface bonded to a wood or particleboard base. Formica often has branding on the underside. If you don&rsquo;t see Formica, it could be Wilsonart, another familiar laminate brand. If the countertop is unique, you can visit the Formica site to find a match. Formica is known for creative collaborations that lead to unique design offerings.</p></div>

Q: Are quartz countertops better than laminate?

• <div><p>There are several significant differences between <a href="https://www.angi.com/articles/laminate-vs-quartz-countertops.htm">laminate and quartz countertops</a>. Quartz is much pricier than laminate but can last for decades, while laminate lasts around 15 years. Laminate can&rsquo;t be repaired or resealed and is easier to damage than quartz, which can be repaired. Both quartz and laminate are prone to heat damage. Usually, the choice comes down to your budget. </p></div>

Q: How long do laminate countertops last?

• <div><p>Laminate countertops can last between 10 and 30 years, though a more common estimate is 10 to 15 years. The exact lifespan depends heavily on usage and how well they are maintained. Because they are a budget-friendly option, they are more prone to scorching and scratches than other materials. You can extend their lifespan with daily maintenance using a soft cleaner and regular sealing.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: How can I cut my countertop without chipping?

• <div><p>You can cut countertops without chipping by using your saw correctly and having a new fine-toothed blade. You can also put masking tape on the front of the countertop material across the cut line and cut from front to back. However, it is very hard to cut countertops without chipping them, especially if they are made of stone or more fragile materials like laminate. The best advice is to know how to use the equipment, use the correct cutting method for the material, cut from back to front, move slowly, and practice on scrap material first.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your countertop and backsplash service project in Patten, ME?

Select your specific project to find the pro for you.

Verified Reviews for Countertop And Backsplash Service pros in Patten, ME

*The Angi rating for Countertop And Backsplash Service companies in Patten, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Countertop And Backsplash Service needs.

*The HomeAdvisor rating for Countertop And Backsplash Service companies in Patten, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Countertop And Backsplash Service needs.

Last update on February 07, 2025

Reviewed in February 2025
I hired atlas earthworks to put a driveway and parking lot in on a remote piece of land I purchased. He was easy to commute with and did a great job. I even added some work to the job and he finished ahead of schedule. He has nice equipment and an extremely positive attitude. It was a breath of...
Atlas Earthworks LLC
Request a quote
Reviewed in September 2021
I hired a different business outside of HomeAdvisor
High-Power Lawn Care
Request a quote
Reviewed in February 2018
Excellent. They did a great job and installed it very timely manner.
Mainely Water
Request a quote
Reviewed in May 2017
Our daughter had Tom, the owner, to do some work for her and she suggested them to us as they did such a good job for her. They sent Nick and a helper. I would guess that it would take around 4 hours to do everything. 7 and half hours later, they finished and handed me a bill for over $1100....
Pope Electric Inc
Request a quote
Reviewed in September 2016
This is the 2nd time I have used Ed for a computer repair. My computer was infected with something Ed called "sweet packs" and a "re directer?" I'm not sure if I am describing that last one properly, but Ed cleared them both with reasonable rates. I will have him go over my computer every 6...
ProActive Computer Services
Request a quote
Reviewed in April 2014
The only thing I am giving one star for is that the company showed up quickly after the fire. As for the job that was done (I can't call it job completed) they were horrible. After the first day my wife and I spent going around the bedrooms after their crew to clean behind dressers, desks and...
PENOBSCOT CLEANING SVC
Request a quote
Reviewed in September 2011
It was a great job done exactly as promised
The Chimney Man
Request a quote

Find Countertop and backsplash pros in Patten

Tejada's Remodeling Inc

4.7(

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Patten, ME and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Warranties offered

"Prompt response… very professional! I have been without a sink for two weeks, called a few companies and no follow up.. Tejadas was able to fit me in right away.. they were at my home on time and did a great job cutting my granite countertop and positioned my sink to get installed by the plumber… I would definitely hire them again for any future jobs"

Response time1 day

11 neighbors recently requested a quote

Recommended by79%of homeowners

Solid Surface Countertops - Repair (Concrete, Stainless Steel, etc)

Serving Patten, ME and surrounding areas

In business since 1993

Free estimates

Small jobs welcome

"Did and excellent job repairing the seam in my granite countertops."

Swap from solid surface to stainless steel

After: Auntie Anne's Pretzel Countertop Repair

After: Red Quartz Countertop Crack Repaired

+108

Recommended by95%of homeowners

Request Quote

Superior Refinishing Solutions

4.3(

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Patten, ME and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"It went very well, we will continue to use them with any resurfacing job . Tubs, showers, Cabinets, tile. It’s endless what they can do! Prompt, Professional Service."

+17

Recommended by88%of homeowners

Request Quote

New England Home Renovations LLC

4.0(

311

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Patten, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"We contacted Richard regarding the job, and had a quote back within the week - good quote. He quickly responded to any questions we had, and scheduled the work. They completed the demo in one day, a few days before the cabinets showed up - if I had to do this again, I would hold off on the demolition until the cabinets were in, as it is difficult to live without a kitchen, especially with children. It took approximately two weeks for the kitchen to be completed, with slight delays due to a damaged cabinet, time for the new countertops to set, appliance delivery, etc. One hitch developed when the dishwasher was hooked up incorrectly, and water ran into my basement - I called Richard, and once I got through the answering service, he contacted the plumber, and we resolved the problem immediately over the phone, and the plumber was at my house at 8 the next morning ( a Saturday of a holiday weekend) to permanently fix the problem. At the end of the two weeks, we had a great new kitchen, well installed, and we were thrilled!"

+37

Recommended by89%of homeowners

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Patten, ME and surrounding areas

In business since 2020

Free estimates

Emergency services offered

TSC Contractors specializes in remodels and renovations. No jobs are too big or too small. Kitchen and Bathroom Remodeling, Flooring, Windows & Doors. Decks & Patios.

Recommended by100%of homeowners

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Patten, ME and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"Keyes construction responded to my email within 24 hours. I needed a layer of metal and two layers of shingles removed and everything replaced. He was the best priced and completed the job within a weeks time. The workers were very professional and and showed me and my family nothing but respect. I see using Keyes Construction for all of my future projects! 10 out of 10"

Recommended by44%of homeowners

Request Quote

Friendly Odd Jobs, LLC

1.9(

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Patten, ME and surrounding areas

In business since 2015

Credit card accepted

Friendly Odd Jobs is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities and to provide our employees with a great place to work. We look forward to working with you!

Response time4 days

Request Quote

Countertops and Backsplashes questions, answered by experts

Formica is a brand of laminate, so all Formica is laminate, but not all laminate is Formica. To identify it, look for a thin, plastic-like surface bonded to a wood or particleboard base. Formica often has branding on the underside. If you don’t see Formica, it could be Wilsonart, another familiar laminate brand. If the countertop is unique, you can visit the Formica site to find a match. Formica is known for creative collaborations that lead to unique design offerings.

There are several significant differences between laminate and quartz countertops. Quartz is much pricier than laminate but can last for decades, while laminate lasts around 15 years. Laminate can’t be repaired or resealed and is easier to damage than quartz, which can be repaired. Both quartz and laminate are prone to heat damage. Usually, the choice comes down to your budget.

Laminate countertops can last between 10 and 30 years, though a more common estimate is 10 to 15 years. The exact lifespan depends heavily on usage and how well they are maintained. Because they are a budget-friendly option, they are more prone to scorching and scratches than other materials. You can extend their lifespan with daily maintenance using a soft cleaner and regular sealing.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

You can cut countertops without chipping by using your saw correctly and having a new fine-toothed blade. You can also put masking tape on the front of the countertop material across the cut line and cut from front to back. However, it is very hard to cut countertops without chipping them, especially if they are made of stone or more fragile materials like laminate. The best advice is to know how to use the equipment, use the correct cutting method for the material, cut from back to front, move slowly, and practice on scrap material first.

The Patten, ME homeowners’ guide to countertop and backsplash services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deirdre Sullivan
•
Jul 9, 2026Jul 9, 2026
How Much Do Caesarstone Countertops Cost? [2026 Data]
Are you getting close to deciding on Caesarstone® countertops for your home? Discover all the details behind Caesarstone® countertop costs in this guide.
Jill Harness
•
May 30, 2026May 30, 2026
How Much Do Porcelain Countertops Cost? [2026 Data]
The cost of porcelain countertops is affected by many factors, primarily the material's type (tile or slab) and finish, as well as your counter’s size and shape.
Haley Nothstein
•
May 30, 2026May 30, 2026
What Is the Average Cost of Laminate Countertops? [2026 Data]
Discover the cost of installing laminate countertops, including how their size, material, and finish impact your total price.
Deane Biermeier
•
Jul 9, 2026Jul 9, 2026
Do You Need a Backsplash in Your Kitchen? Beautify and Protect Your Remodel
Do you need a backsplash? Technically, no. However, installing one in your kitchen can add beauty and help avoid costly repairs. Here's how and why.
Stephanie Mickelson
•
Jul 9, 2026Jul 9, 2026
Countertop Square Footage Calculator: How Much Countertop Do I Need?
When it’s time for new countertops, this calculator will help you know how much countertop you need to complete your project.
Kelly Weimert
•
Jul 9, 2026Jul 9, 2026
4 Popular Kitchen Backsplash Ideas to Elevate Your Aesthetic
From protecting your walls from cooking spatter to solidifying your aesthetic, these backsplash ideas will elevate the form and function of your kitchen.