Get matched with top garbage collectors in Westhampton, MA

On average, a garbage disposal can last anywhere from 7 to 12 years, with many models functioning well for about 10 years. With heavy usage, a motor may last a minimum of five years, while grinding plates will wear down over time. It's generally a good idea to consider a replacement if your unit is approaching the 10-year mark. Other signs that it's time for a new disposal include frequent leaks, persistent clogs, lingering odors, lack of power, or unusual noises. If your unit is not that old, it's worth investigating if a less expensive part, like a rubber seal or a loose hose, is causing the issue.

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.

While the drain connection for a garbage disposal is nearly universal and fits standard sink drain holes of 3 1/2 to 4 inches, the size of the disposal unit itself is not. You must have enough space in the cabinet underneath your sink to accommodate the disposal's housing. A larger model may not fit in a compact cabinet or if the existing plumbing is arranged in an unusual way. Before buying a new garbage disposal, measure the available space under your sink. If you are replacing an old unit, it's often easiest to choose a new model of a similar size.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.