Get matched with top pool table assembly pros in Forest Hill, LA

Shipping container pools are prone to rust and corrosion over time, especially if you install a saltwater system. Though the interior of your pool should be lined, the outside is at risk. Luckily there are a few things you can do.

Elevate your pool or place it on a foundation to prevent moisture buildup along the bottom of the container. Apply a rust inhibitor or paint to protect the outside of your pool, and maintain the proper chlorine levels to reduce the rate of corrosion. Regularly inspect your pool for signs of corrosion, and take action when necessary. 

Your pool should only lose around 1/4 of an inch of water per day, give or take. More wind, sunlight, and heat will cause this number to increase, while rainy or cloudy days will decrease the amount of water that evaporates.

Yes, too much chlorine can make your pool cloudy, especially after you have recently shocked it. However, low chlorine levels are a more common cause of cloudy water. An imbalance in pH or an excess of any chemical can also lead to cloudiness. To determine the specific cause, you should test your pool water to check the levels of chlorine, pH, and other chemicals. Regular maintenance is essential for keeping your pool clean and clear.

Generally, you do not need to drain your pool to convert it to a saltwater system. The main exception is if you have used an antibacterial agent containing polyhexamethylene biguanide to sanitize your pool, as these sanitation products do not mix well with saltwater systems. If this is the case, you will need to start fresh. You can either drain the pool or treat the existing water with a high dose of chlorine to remove the antibacterial agent. If you choose the chlorine treatment, wait several days to allow the chlorine to work before proceeding with the conversion. If you are unsure whether this applies to your pool, consult a pool technician.