Get matched with top mailbox repairers in Basile, LA

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

Like stains, the best way to prevent cracks is by treating them as quickly as possible. You can apply a protection cream or conditioner, which will fill in and plump any gaps or wrinkles that may start to form.

This depends on the furniture. It’s certainly fine for wood, metal, or composite materials to get wet. The same cannot be said for affiliated cushions and coverings. Many of these adjacent items claim to be water-resistant, but poorly-made accessories take longer to dry, leaving plenty of time for mold to grow. Keep an eye on how your furniture stands up to rain before going in with a pressure washer.

When water penetrates wood, the wood swells, causing the wood and veneer to separate. This separation creates bubbles on the surface of your furniture. If water spills on wood veneer, it needs to be dried ASAP. Surface spills can cause minor damages like white spots and blushing, but if you’re slow to action, you’re looking at more work—and spending—to restore your wood veneer.