Get matched with top gas log pros in Stanton, KY

In most cases, yes, it’s safe to light a gas water heater manually, but you should shut the gas off first, open a window, and let the space air out for about 10 minutes. Modern water heaters shut the gas off entirely if the pilot light goes out, but airing out the area beforehand is good practice and will ensure it’s safe to relight your pilot light manually. Just make sure you turn the gas valve to “pilot” before lighting. If the light keeps going out or won’t light at all, call in a professional.

Fixing a gas leak costs about $45 to $150 per hour for a plumber or gas line specialist. The job’s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about $120 to $170. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to $1,500 to $5,000. Keep in mind that gas leaks are very serious issues, so don’t hesitate to contact a plumber or gas line specialist immediately.

Even though their jobs sound similar—both professions work on pipes—a plumber and pipefitter actually have very different jobs, and pipefitting isn’t considered plumbing. Pipefitting is done in commercial and industrial buildings and factories, and the pipes carry gas, chemicals, acid, and other potentially hazardous substances. Pipefitters often work in intense conditions while plumbers may work in lower-pressure environments.

No, you shouldn’t leave a gas line uncapped because it can allow gas to escape into your environment, which can lead to fires, explosions, and health hazards. That’s why it’s critical to properly cap and seal any unused gas lines as soon as you can. If you’re not comfortable with that, you can always call a licensed plumber to safely handle it for you.