Top-rated sandblasting pros.

Best sandblasting pros near Cumberland, KY

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Cumberland, KY?

Select your specific project to find the pro for you.

Top-Rated Sandblasting pros in Cumberland - Updated Nov 2026

Ronnie's Pressure Washing
4.3(
3
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Cumberland, KY and surrounding areas

"Ronnie was very thorough looking at the chimneys and analyzing our needs to give us an accurate quote. He thoroughly talked through the quotes and allowed me to ask many questions. When he came to do the job, he brought a helper (Big John). The two guys completed the job in a few hours, stacked the excess bricks nicely, and cleaned up after themselves. When doing the chimney sweeping, Ronnie laid out large cloth tarps to catch any falling ash/dust/debris and used a highly sealed vacuum to clean up inside our house when he was done. He even attached fans to the top of the chimneys to draw a lot of the ash/dust up out of the chimney instead of letting it fall into our living room. I was dreading having our chimneys cleaned expecting it to be a huge dirty mess. Instead, Ronnie and John worked quickly and kept things nice and clean.
As an added bonus, both men nicely talked to my four year old son who wanted to know EVERYTHING that they were doing."
Recommended by100%of homeowners
Sandblasting Services FAQs, answered by experts

Costs depend on paint type, surface condition, labor, and required prep work for repainting.

Your pro will most likely bill you at an hourly rate of $50 to $80 per hour to sandblast a door due to its small size. This type of job won't take long, so if you have other surfaces that need cleaning, schedule those tasks at the same time to get your money's worth from your pro's visit.

Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

The Cumberland, KY homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.