Best dishwasher installation pros near Camargo, KY

Water is sitting at the bottom of your dishwasher, likely because the filter is dirty with food debris or because the drain hose has a clog. If the water is still sticking around after following the steps above, it’s time to contact a local plumber.

A clogged air gap can cause a dishwasher not to drain. There are, however, other potential issues that can lead to improper drainage. For example, if you have attached the air gap to a garbage disposal and forgotten to remove the knockout plug, wastewater may backflow into the dishwasher. Check that the air gap is installed properly, and then look for clogs in the air gap and dishwasher filters. 

If your dishwasher keeps filling with water at the bottom but doesn’t fill into the sink, the issue is likely due to a blockage within the dishwasher or drain. Regularly clean your dishwasher filter basket to ensure it’s not clogged with food, and run a vinegar rinse periodically if you have hard water to remove limescale buildup.

You can repair minor damage to a dishwasher drain hose with tape designed to handle moisture but it’s probably better to simply replace it. Dishwasher hoses are inexpensive items that, although they require some muscle to change, are best swapped out. You don’t want to find your kitchen has flooded because of a faulty part that usually costs between $10 and $30.