Get matched with top woodworkers in Baxter, KY

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Many modern homes have soffits, but older ones don’t, and you may be wondering why. Older homes have eaves that extend further beyond the home and help to circulate air, negating the need for a soffit. This style of building has faded away, therefore, modern homes need separate soffit installation. Modern soffits are more efficient than this older style and require less material to construct, saving homeowners money.

Hiring a woodworker can be expensive, depending on the job, but it’s very often well worth the investment. Woodworkers are able to provide custom pieces of furniture and handmade construction to present a finished product that is exactly to your specifications. If you have a specific vision for a one-of-a-kind piece of furniture or home feature, the cost of hiring a professional woodworker is worthwhile. Plus, you’ll often get a higher quality product than what you could buy in stores for a fraction of the price.

If you don’t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You’ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding.