How much does an asphalt overlay cost?

• <div><p>An asphalt overlay or top coat costs between $3 and $7 per square foot. For a standard, single-car driveway that’s 10 feet wide and 20 feet long, that’s a total of between $600 and $1,400. For a two-car driveway, you’re looking at a total of between $1,200 and $3,000. </p></div>

Get matched with top asphalt driveway pros in Junction City, KS

Q: Do you need a permit to build your own driveway?

• <div><p>The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your <a href="https://www.angi.com/articles/driveway-ideas.htm">driveway ideas</a>. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.</p></div>

Q: How long does it take for new asphalt to dry and cure?

• <div><p>New asphalt goes through two stages: drying and curing. Drying typically takes 24 to 72 hours, after which the surface is solid enough for light use like walking or careful driving. While you may be able to park on it after 72 hours, the surface is still soft and should be treated gently. Full curing is a much longer process, taking anywhere from 30 days to a full year for the asphalt to reach maximum strength. During this extended curing period, the asphalt is susceptible to damage from heavy vehicles, sharp objects, and high temperatures. Factors like weather, the specific asphalt mix, and application thickness all influence drying and curing times. For the most accurate timeline and to ensure the longevity of your new asphalt, it is always best to consult with your installation contractor for their specific recommendations.</p></div>

Q: The cost to pour a driveway apron depends on the material and size

• <div><p>The cost to pour a driveway apron depends on the material and size. Concrete costs <b>$3 to $10 per square foot</b>, asphalt ranges from<b> $2 to $5</b>, and pavers are <b>$5 to $15 per square foot.</b> Additional expenses, like excavation, base material, and labor, can increase the total cost. For example, a standard 12x15-foot concrete apron could cost between <b>$540 and $1,800</b>, depending on local rates and additional work required. Always consult a <a href="https://www.angi.com/nearme/driveway-paving/">local driveway paving contractor</a> to get an accurate estimate tailored to your project.</p></div>

Q: What’s the best type of driveway for the snow?

• <div><p>Asphalt driveways are affordable and able to withstand sub-zero temperatures. The asphalt surface makes it easy to plow snow, and it has excellent traction for slippery winter days. Another benefit: it absorbs heat from the sun and can then help to melt snow and ice more quickly than other surfaces.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your asphalt driveway service project in Junction City, KS?

Select your specific project to find the pro for you.

Find Asphalt driveway pros in Junction City

PB Land Management LLC

5.0(

)

Gravel or Loose Fill Paving - Install, Spread or ScrapeGravel or Loose Fill Paving - Install, Spread or Scrape - For Business

Serving Junction City, KS and surrounding areas

Approved

Super Service Award Winner

In business since 2023

Free estimates

Small jobs welcome

"Peyton and his crew came out to do some grading and driveway work, they did efficient and fast quality work."

Response time10 hrs

2 neighbors recently requested a quote

Request Quote

Shaw's Dirt Work LLC

New to Angi

Gravel or Loose Fill Paving - Install, Spread or Scrape

Serving Junction City, KS and surrounding areas

Approved

Veteran, family owned a operated landscape and dirt services company. We starve to provide a quality and affordable service. We strive to leave every jobsite with happy customers we will do what we can to work with any budget big or small! Never the less we will only do the job one way, the right way!

Request Quote

Gustafson Concrete Inc.

New to Angi

Concrete Driveways - Install

Serving Junction City, KS and surrounding areas

Approved

In business since 1991

Free estimates

Credit card accepted

Were dedicated to providing our clients with the very best in concrete installation and repair for driveways, sidewalks, patios, steps, and a variety of other projects. With over 15 years of industry experience, we take and enormous amount of pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.

2 neighbors recently requested a quote

Request Quote

CNC Exteriors

New to Angi

Brick and Stone Driveways & Floors - InstallConcrete Driveways & Floors - Install- For BusinessConcrete Driveways - Install+1 more

Serving Junction City, KS and surrounding areas

Approved

We are a small family built company. From humble beginnings in Lamar Colorado, we strive for fair prices with high quality results. Over the course of 13 years, our projects have run from the Rockie Mountains to the Ozarks.

Request Quote

MHK Yard & Gravel LLC

5.0(

)

Asphalt Paving - Repair or Patch

Serving Junction City, KS and surrounding areas

In business since 2025

Free estimates

Credit card accepted

"I had them out for some yard work and they noticed my window well cover was broken. They offered to fix it and built a new one in just a few hours so my dogs wouldn?t fall in. They also fixed my gate while they were here. Super quick and thoughtful. Highly recommended!"

Response time4 hrs

Brick and Stone Driveways & Floors - Install

Serving Junction City, KS and surrounding areas

In business since 2000

Emergency services offered

Warranties offered

"Perfection! Randy is the nicest, person! His crew is efficient, hard working, and skilled! I am SOO glad we hired him to do our driveway and patio?they looked awesome!!"

Response time1 day

Recommended by96%of homeowners

Brick and Stone Driveways & Floors - InstallGravel or Loose Fill Paving - Install, Spread or ScrapeGravel or Loose Fill Paving - Install, Spread or Scrape - For Business+1 more

Serving Junction City, KS and surrounding areas

In business since 2023

Free estimates

"Avrey did a great job redoing leveling and adding me gravel to our driveway. The man sure knows how to run his John Derek."

These are photos of the finished rock bed and photos of the property before the installation.

Recommended by100%of homeowners

Asphalt Paving - Repair or Patch

Serving Junction City, KS and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"Jason was awesome! He did a great job on our back door replacement. He made sure he did it right. I will absolutely consider him for our next project!"

Response time1 day

Recommended by100%of homeowners

Request Quote

Asphalt Paving & Maintenance, LLC

3.7(

)

Asphalt Paving - Install- For BusinessAsphalt Sealing

Serving Junction City, KS and surrounding areas

In business since 2014

Free estimates

"Be sure to double-check what you are getting and be clear about what you expect."

Response time3 days

Recommended by83%of homeowners

Brick and Stone Driveways & Floors - InstallInterlocking Pavers for Driveways & Floors - Install

Serving Junction City, KS and surrounding areas

In business since 2005

Free estimates

Offers commercial services

"They were great. Very particular and detailed oriented."

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 44

Asphalt Driveways questions, answered by experts

The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your driveway ideas. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.

New asphalt goes through two stages: drying and curing. Drying typically takes 24 to 72 hours, after which the surface is solid enough for light use like walking or careful driving. While you may be able to park on it after 72 hours, the surface is still soft and should be treated gently. Full curing is a much longer process, taking anywhere from 30 days to a full year for the asphalt to reach maximum strength. During this extended curing period, the asphalt is susceptible to damage from heavy vehicles, sharp objects, and high temperatures. Factors like weather, the specific asphalt mix, and application thickness all influence drying and curing times. For the most accurate timeline and to ensure the longevity of your new asphalt, it is always best to consult with your installation contractor for their specific recommendations.

The cost to pour a driveway apron depends on the material and size. Concrete costs $3 to $10 per square foot, asphalt ranges from $2 to $5, and pavers are $5 to $15 per square foot. Additional expenses, like excavation, base material, and labor, can increase the total cost. For example, a standard 12x15-foot concrete apron could cost between $540 and $1,800, depending on local rates and additional work required. Always consult a local driveway paving contractor to get an accurate estimate tailored to your project.

Asphalt driveways are affordable and able to withstand sub-zero temperatures. The asphalt surface makes it easy to plow snow, and it has excellent traction for slippery winter days. Another benefit: it absorbs heat from the sun and can then help to melt snow and ice more quickly than other surfaces.

An asphalt overlay or top coat costs between $3 and $7 per square foot. For a standard, single-car driveway that’s 10 feet wide and 20 feet long, that’s a total of between $600 and $1,400. For a two-car driveway, you’re looking at a total of between $1,200 and $3,000.

The Junction City, KS homeowners’ guide to asphalt driveway services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Timothy Moore
•
Apr 16, 2026Apr 16, 2026
How Much Does an Asphalt Driveway Cost? [2026 Data]
Calculate the cost of installing a new asphalt driveway based on dimensions, depth, finishes, and other custom driveway details.
Rachel Hoffman
•
Aug 31, 2026Aug 31, 2026
How Much Does Asphalt Driveway Repair Cost in 2026?
Asphalt driveway repair costs account for everything from hairline cracks to complete overhauls. Learn what to expect from your asphalt repair bill.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does It Cost to Pave a Driveway? [2026 Data]
The average cost to pave a driveway is $4,897, but prices vary by size and material. This guide breaks down common cost factors and helps you budget.
Lawrence Bonk
•
Jul 9, 2026Jul 9, 2026
How Long Does an Asphalt Driveway Last? And Tips to Extend Its Lifespan
Adding a new asphalt driveway to your home can boost its overall appearance and give homeowners a nice ROI down the line. But how long do asphalt driveways last, and what can you do to maximize their lifespans? Read this guide to find out.
Dan Simms
•
Aug 1, 2026Aug 1, 2026
Asphalt vs. Concrete Driveways: Which Is Right for You?
Which one is better for your home, an asphalt or concrete driveway? Learn the difference in initial installation, pros and cons, and follow-up costs.
Jouviane Alexandre
•
Jul 9, 2026Jul 9, 2026
6 Types Of Asphalt for Driveways
Choosing the right asphalt is key to a long-lasting surface. Find out which mix works best for roads, driveways, and heavy-traffic areas.