Get matched with top pool and spa technicians in Conway Springs, KS

To refill a hot tub after winter, start by opening up the tub and giving it a quick cleaning. If you use antifreeze, drain out the water then grab a hose and thoroughly clean the tub shell out, spraying water into each jet of the tub. 

Reconnect the hot tub and turn the power back on. When it’s time to fill the tub again, insert the hose into the filter well (if available). Avoid trapping too much air in the water lines, which can cause the pump to lock up when it starts again. Add the necessary chemicals and start the heating process. It will take some time—most of a full day—for the water to heat up again.

Follow these general safety tips for spas and hot tubs:

• Keep your exterior electrical receptacles covered and dry, especially around your hot tub and pool during periods of use.

• Make sure you have a GFCI (ground fault circuit interrupter) properly installed to ensure no one gets accidentally shocked or injured by electrocution. 

• Don’t use the hot tub or your pool during a thunderstorm. 

• Before using the hot tub, have a certified electrician thoroughly inspect your hot tub and its wiring to make sure you’re in full compliance with all applicable local building codes. 

Most newer hot tubs are not expensive to maintain. Hot tub maintenance costs about $500 to $1,000 per year. You can DIY, but a pro can clean and treat your hot tub with chemicals and save you time. The biggest hot tub expenses are heating and repairs, but you can preserve your investment with regular maintenance.

Though a hot tub has many benefits, there are a few cons. Mainly, hot tubs require a lot of maintenance. You’ll need to deep clean yours quarterly, test the pH at least once or twice a week, and add sanitizing chemicals once a week. They also have relatively high ongoing costs since you’ll need to pay for electricity and repairs.