Get matched with top garage pros in O Fallon, IL

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

The difference between vinyl and rubber garage door bottom seals comes down to cost, flexibility, and climate. Vinyl is the budget-friendly option, lasting well in moderate climates and resisting wear and tear. In colder climates, it can get stiff and make installation more difficult. Alternatively, rubber offers more flexibility, even in freezing temperatures, and better sticks to uneven surfaces. Rubber is more expensive but tends to be more adaptable.

There should not be any visible gaps between the garage door and frame. If the gap is big enough that you can either see daylight or feel a draft, this indicates a problem. Bring in a garage door professional to help you discover why the gap exists. A pro may also be able to offer suggestions for how to insulate a garage.

No, there should not be a gap between your garage door and the floor. Gaps can make your garage less energy efficient, leading to higher energy bills. They also create an entry point for pests like rodents and insects, as well as rain and melted snow, which can lead to foundation damage or mold issues.

If you have a gap under your garage door, potential causes include an uneven garage floor or worn-out weather stripping. To fix it, you can try several solutions:

• Replace the weather stripping: The seal at the bottom of the door may need to be replaced.

• Adjust the garage door: You may be able to adjust the closing position on your garage door opener to eliminate the gap.

• Inspect the floor: If the concrete floor has shifted or is uneven, it may need to be repaired to create a level surface.

If these solutions do not resolve the issue, it is best to call a garage door repair specialist to inspect the door and floor.