Get matched with top carpenters in Victor, ID

Q: How many board feet are in a 2x4?

• <div><p>There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You&rsquo;d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. </p></div>

Q: Is an A-frame home cheaper to build than a traditional house?

• <div><p>An A-frame home can be cheaper to build than a traditional house, but that is not always a given. Prices can be fairly similar in some cases, depending on the location, design, and necessary site preparation. Costs for an A-frame typically run between <b>$100 to $200 per square foot</b>, which is comparable to the <a href="https://www.angi.com/articles/how-much-does-it-cost-build-house.htm">cost of a traditional home</a>. The cost of an A-frame can come in under those numbers if you opt for a prefabricated kit.</p></div>

Q: How long does it take to frame a house with steel?

• <div><p>Framing a house with steel generally takes less time&mdash;around five to eight weeks&mdash;than most building materials. The steel components can also be made quickly off-site and manufactured with pre-punched holes for running piping and electrical wiring, which will lessen the prep work and extra labor during construction.</p></div>

Q: Will a 2x6 hold a porch swing?

• <div><p>Yes, a 2x6 should hold a porch swing and safely support the load. A smaller joist runs the risk of it not offering enough support for the swing. If you have a joist smaller than 2x6, add additional bolstering support.</p></div>

Q: Do baseboards have to be nailed into studs?

• <div><p>Baseboards don&rsquo;t have to be nailed into studs. However, nailing them into studs adds to their stability. When studs aren&rsquo;t available, you can secure them with drywall nails directly into the drywall and adhesive. Always aim to nail into studs, especially in high-traffic or impact-prone areas.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your carpentry project in Victor, ID?

Select your specific project to find the pro for you.

Verified Reviews for Carpentry pros in Victor, ID

*The Angi rating for Carpentry companies in Victor, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Carpentry needs.

*The HomeAdvisor rating for Carpentry companies in Victor, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Carpentry needs.

Last update on August 04, 2026

Reviewed in August 2026
We hired Regulus to handle a nearly complete interior renovation of our home including 3 bathrooms, a kitchen, wood flooring, carpentry, plumbing and electrical. Nate was a very thorough communicator, very professional and knowledgeable, and stayed in our timeframe. He did everything we asked...
Regulus Building Company LLC
Request a quote
Reviewed in October 2025
Best company I’ve worked with for staining! I needed help staining the outside of my house Because two other companies had messed it up beforehand. Genesis came in and got it done in under a week! At a fair price to which is great. The laborers in the company are very friendly and easy to work...
Genesis Painting & Staining
Request a quote
Reviewed in July 2025
Teton Movers of Jackson did a stellar job. We needed beds moved between 3 floors. They were efficient, polite and tidy. They even helped me move my big heavy vacuum without me asking. We were in a bind because the company that was supposed to deliver our new mattress got nervous about our rural...
Teton Movers
Request a quote
Reviewed in February 2025
Dustin and his crew did all new kitchen cabinets in our remodel. Our project had a lot of irregularities and they made sure everything was done to the highest standards. They are honest, hard working, and we highly recommend them!
Lost River Woodworks, LLC
Request a quote
Reviewed in August 2024
I couldn't be happier with the service provided. They repaired our siding and did the job perfectly and cleaned up everything afterward. If we need more work done in the future, they'll be the first ones we call.
Ideal Siding Boise
Request a quote
Reviewed in May 2024
Brandon and his crew explained everything along the fence. The fence looks great!
Fortress Fence and Outdoor, LLC
Request a quote
Reviewed in February 2024
Mani was prompt, reliable, knowledgeable, professional, and friendly.
Ojeda's Roofing Solutions, LLC
Request a quote
Reviewed in November 2023
As a contractor myself-it was a relief to have another contractor actually come on the job, be a professional as well as be within the agreed budget and on time! I will be using Blue Note Painting as often as I can get them on my projects.
Blue Note Painting, LLC
Request a quote
Reviewed in October 2023
I really enjoyed working with Grand Teton painting. They came and stained the outside of my house. I loved how they communicated with me every step of the way and I loved the results. I definitely will have them come back to do my interior. I totally recommend them if you are in the Teton valley.
Grand Teton Painting
Request a quote
Reviewed in August 2023
Hired for screen repair. Quick response on scheduling and completion of work. Thanks Austin!
Timbrek Landscape LLC
Request a quote

Find Carpenters in Victor

Big Sky Builders

4.9(

)

Deck or Porch - Repair

Serving Victor, ID and surrounding areas

Approved

In business since 2023

Free estimates

Warranties offered

"Just a super company. The owner was there to walk me through the process, listening to my needs and factoring them into the design. He was also there through the building - quickly resolving the minor issues and ensuring a great job and my satisfaction. I highly recommend him and his team, and would certainly use him again."

59 neighbors recently requested a quote

Recommended by24%of homeowners

Deck or Porch - RepairCarpentry Framing - Repair

Serving Victor, ID and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Small jobs welcome

"We are so happy to have our basement competed. James and his crew finished our basement by drywalling, painting, trimming out windows, door frames and i stalling doors. It looks great!"

Response time2 days

Response rate94%

26 neighbors recently requested a quote

Request Quote

Martinez Carpentry, LLC

5.0(

)

Closet - BuildInterior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair+2 more

Serving Victor, ID and surrounding areas

Approved

In business since 2024

Free estimates

Small jobs welcome

"Great job at a fair price I will work with again."

+28

Response time1 day

Response rate92%

1 neighbors recently requested a quote

Deck or Porch - Repair

Serving Victor, ID and surrounding areas

Approved

In business since 2023

Free estimates

Credit card accepted

"They built my deck it’s beautiful. Good fast work, great communication."

Response time7 hrs

Response rate90%

Recommended by33%of homeowners

Request Quote

Red Wind Management LLC

5.0(

)

Deck or Porch - RepairInterior Trim and Decorative Moldings - RepairWindow Frame - Repair

Serving Victor, ID and surrounding areas

Approved

In business since 2024

Emergency services offered

Warranties offered

"Austin did a great job repairing our deck and installing the handrail really appreciate his effort. I would recommend him for that sort of work to anyone."

2 neighbors recently requested a quote

Carpentry Framing - RepairDeck or Porch - RepairInterior Trim and Decorative Moldings - Repair+1 more

Serving Victor, ID and surrounding areas

Approved

Free estimates

Credit card accepted

Offers commercial services

"Jesse was quick and efficient. He was very pleasant to talk to and ensured he did the job right!"

4 neighbors recently requested a quote

Request Quote

Pabis Construction LLC

5.0(

)

Carpentry Framing - InstallDeck or Porch - Repair

Serving Victor, ID and surrounding areas

Approved

In business since 2021

Free estimates

Emergency services offered

Pabis Construction LLC provides exceptional service to the surrounding areas. Always taking pride in all of our services. Whatever your home improvement needs may be, you can count on our company to leave you satisfied and happy. Our customer satisfaction is our top priority. We will earn your trust for a lifetime. We believe in making all clients repeat clients. Our staff listens to your needs regarding your home improvement project.\n \nCall us today you'll be relieved you did. Thank you

+62

Response time11 hrs

Recommended by100%of homeowners

Interior Trim and Decorative Moldings - Install

Serving Victor, ID and surrounding areas

Approved

In business since 2005

Free estimates

Credit card accepted

"We've worked with Nathan on the remodel of two bathrooms, a kitchen and the addition of a half bath. And did it from 1300 miles away. Wouldn't work with anyone else and would recommend him to any one looking for a honest, professional craftsmen to do the job."

+29

Response time2 days

Recommended by100%of homeowners

Carpentry Framing - RepairExterior Shutters - Repair or RestoreGazebo or Freestanding Porch - Repair+4 more

Serving Victor, ID and surrounding areas

Approved

"Niche has always completed all aspects of carpentry to the highest standard."

Request Quote

Snake River Case & Mill, LLC

2.9(

)

Furniture - Build Custom

Serving Victor, ID and surrounding areas

Approved

In business since 1999

Free estimates

Credit card accepted

"Ben was great to work with and my kitchen cabinets are so beautiful! I highly recommend this company."

Recommended by66%of homeowners

Request Quote

...

Showing 1-10 of 95

Carpentry questions, answered by experts

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet.

An A-frame home can be cheaper to build than a traditional house, but that is not always a given. Prices can be fairly similar in some cases, depending on the location, design, and necessary site preparation. Costs for an A-frame typically run between $100 to $200 per square foot, which is comparable to the cost of a traditional home. The cost of an A-frame can come in under those numbers if you opt for a prefabricated kit.

Framing a house with steel generally takes less time—around five to eight weeks—than most building materials. The steel components can also be made quickly off-site and manufactured with pre-punched holes for running piping and electrical wiring, which will lessen the prep work and extra labor during construction.

Yes, a 2x6 should hold a porch swing and safely support the load. A smaller joist runs the risk of it not offering enough support for the swing. If you have a joist smaller than 2x6, add additional bolstering support.

Baseboards don’t have to be nailed into studs. However, nailing them into studs adds to their stability. When studs aren’t available, you can secure them with drywall nails directly into the drywall and adhesive. Always aim to nail into studs, especially in high-traffic or impact-prone areas.

The Victor, ID homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does Carpentry Framing Repair Cost? [2026 Data]
Get the latest carpentry framing repair cost estimates. Learn what impacts your price and how to budget for your framing repair project.
Angi
•
Sep 26, 2026Sep 26, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Kate Fann
•
Oct 6, 2026Oct 6, 2026
How Much Does It Cost to Install Shiplap? [2026 Data]
The cost to install shiplap siding or wall surfaces in your home depends on several factors, including the material type and the size of your project.
Jenna Jonaitis
•
Jul 9, 2026Jul 9, 2026
A Complete Guide to Common Carpentry and Construction Terms You Should Know
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
Mizuki Hisaka
•
Jul 9, 2026Jul 9, 2026
What Is Millwork?: A Complete Guide
What is millwork? If you’re curious to learn more about millwork and how builders incorporate it into your home, read this guide.
Sara Coleman
•
Jul 20, 2026Jul 20, 2026
Journeyman Carpenter vs. Carpenter: Who to Hire for Your Project
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.