Best chimney inspectors near Van Meter, IA

Generally, hailstones that are one inch in diameter or larger can cause significant damage to a roof. However, smaller hail can also cause damage, particularly when accompanied by strong winds, if it strikes an aging or poorly maintained roof, or if hailstorms are frequent in your area. Hail that is ¼ inch (pea-sized) or smaller poses a minimal risk of immediate, permanent damage, but cumulative impacts can cause deterioration over time. The extent of the damage also depends on the roofing material; hail-resistant tiles like slate or certain types of asphalt shingles can withstand impacts better than other materials. If you are concerned about potential damage after a storm, it is always a good idea to have a professional roofer conduct an inspection.

While you can technically install new roof sheathing over an old layer, it is generally not recommended for several reasons. Installing new sheathing over old can trap moisture, which may lead to future problems, especially in humid climates. It also adds significant weight to the roof structure and prevents you from inspecting the original sheathing for rot, mold, or other damage.

However, in some cases, if the old sheathing has been thoroughly inspected and is in excellent condition with no signs of rotting, warping, or damage, a roofer may install new sheathing over it to add strength and stability. Despite this, the more common and recommended practice is to remove the old roof sheathing entirely before installing a new layer, as removing it is not a difficult task.

The most obvious and severe sign of a roof leak is the presence of wet spots on your ceilings, specifically on the top floor of your home. You can also identify a roof leak from your attic if you see sagging insulation or if you notice mold growth or water stains on the rafters or the underside of the roof deck. From the street, look for cracked or missing shingles, moss growth, and shingles that are curling upward, all of which can suggest a leak.

Roof inspection companies sometimes need to be licensed, but it depends on the state and local municipality where you live. You can contact your local building department to see if licensing is required and use Angi’s contractor license lookup tool to confirm that the company holds the proper licensing. It’s also a good idea to hire a roof inspection company certified by the National Roof Certification and Inspection Association (NRCIA), as this helps ensure you’re getting a professional and reliable inspection from a company that is recertified annually.