Get matched with top woodworkers in Marcus, IA

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Q: What is the difference between wainscotting and board and batten?

• <div><p>Board and batten is a type of wainscotting that uses wider boards that are placed vertically, and it has a much more rustic aesthetic than wainscotting. <a href="https://www.angi.com/articles/types-of-wainscoting.htm">Common wainscotting styles</a> are raised-panel, flat-panel, and beadboard. Wainscotting is more intricate and will typically use more elegant, subtle trims compared to the more farmhouse-inspired boards of board and batten styles. </p></div>

Q: What do most carpenters charge per hour?

• <div><p>On average, the cost to hire a carpenter ranges from about <b>$75 to $100 per hour</b>, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.</p></div>

Q: Does a carpenter have to be licensed?

• <div><p>Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don&rsquo;t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">contractor licensing tool</a> to find out whether a potential carpenter is licensed in your state.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Marcus, IA?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Marcus, IA

*The Angi rating for Woodworking companies in Marcus, IA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Marcus, IA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on June 27, 2026

Reviewed in June 2026
The contractor did a great job! We are very pleased with our new driveway. They are experienced and are very dependable. We highly recommend R & J Concrete!
R & J Concrete
Request a quote
Reviewed in October 2024
I hired Cornbelt Concrete & Construction to pour a basement foundation, basement floor, garage footings, garage floor, and driveway approach for my new house and garage. They were professional, prompt, and did a high quality job! I would recommend them to anybody!
Cornbelt Concrete and Construction, LLC
Request a quote
Reviewed in February 2024
The Brimm brothers did an amazing job laying the carpet for us in our addition. They pay close attention to detail and make sure the finished project looks good. Very pleased with their work and would hire them again.
Brimm Bros. Flooring
Request a quote
Reviewed in November 2023
Going in to remodeling our kitchen my wife and I really didnâ t know how or what to do with the design of our cabinets so we reached out to this designer who now works for Kitchen Design Guys and it really took off from there. We have a galley style kitchen where we were lacking space and...
Kitchen Design Guys TN
Request a quote
Reviewed in January 2023
Felt confident that they were the right ductwork company for us! Arrived on time and never stopped working the entire time they were here. I was able to be in the house while they were here so I witnessed their work ethic in doing a quality job for us. Really felt they went the extra mile in...
Swick's Duct Cleaning
Request a quote
Reviewed in August 2022
They did a great job power washing my roof, home and fence!
Omaha Pro Power Plus Services, LLC
Request a quote
Reviewed in October 2021
The contractor was always in contact with me and did a beautiful job.
Gonzalez Contractors LLC
Request a quote
Reviewed in April 2021
Dominguez Construction did a very great job with remodeling our bathroom. They were willing to do what we wanted and even had good ideas for things we didn’t think about. They are professional and easy to talk to. They show up when they say they are going to be there. I will call them if I have...
Dominguez Construction 3:16
Request a quote
Reviewed in February 2021
They did an amazing job. They were very careful. they had to work around garages and highlines. The tree was hanging over the top of the garage. Was a very large tree. I would highly recommend they. Went above and beyond. I would give them a 10 star.
Siouxland Tree Services, LLC
Request a quote

Find Woodworkers in Marcus

S&K REMODELING

5.0(

)

Carpentry Framing - InstallCarport (Wood) - BuildCloset - Build+4 more

Serving Marcus, IA and surrounding areas

Approved

In business since 2024

Free estimates

Credit card accepted

"They did my exterior o my house amazing work definitely recommend them great people to work with"

+37

Response time2 hrs

Response rate100%

1 neighbors recently requested a quote

Carpentry Framing - InstallCustom Cabinets - Build

Serving Marcus, IA and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"I was very impressed with Sentri Homes - their customer service was excellent. They sent a subcontractor to install some vinyl laminate in my bathroom and he ended up getting glue all over the carpet in our bedroom. The sub ended up ghosting both me and Sentri, leaving me stuck with a ruined carpet. Sentri stuck with me for over a month to get the carpet replaced with the identical original and to get the vinyl job 100% completed. The carpet was a Home Depot exclusive and Sentri handled everything with them. I will be using Sentri for a much bigger renovation I have coming up soon, because I know that they will make sure everything gets done right no matter what problems come up. The vinyl looks great too."

23 neighbors recently requested a quote

Interior Trim and Decorative Moldings - Repair

Serving Marcus, IA and surrounding areas

Approved

In business since 2019

Free estimates

Customers say: Quick response

"Terrific painting job. Masters repaired every place that needed extra, looks like new. Always on time, very impressive!"

+13

Response time12 hrs

Recommended by100%of homeowners

Closet - BuildCustom Cabinets - Build

Serving Marcus, IA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"quality is always excellent. Delivery has always been on time. this is the third time I have used Arkansas wood door"

Recommended by100%of homeowners

Furniture - Build Custom

Serving Marcus, IA and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Gazebo or Freestanding Porch - Repair

Serving Marcus, IA and surrounding areas

In business since 2021

Free estimates

Emergency services offered

"Quick and efficient. Excellent young men."

Response time10 mins

Recommended by12%of homeowners

Gazebo or Freestanding Porch - RepairInterior Trim and Decorative Moldings - Repair

Serving Marcus, IA and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"He just started . Did a good job on the first time . Will be able to share more in the future."

2 neighbors recently requested a quote

Request Quote

Dave Navarro Construction

5.0(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+10 more

Serving Marcus, IA and surrounding areas

In business since 2010

Free estimates

"The workmanship was excellent. The work was completed within the time frame agreed upon as well as the price quoted. Everything was done very professionally from start to finish. I HIGHLY recommend Dave Navarro Construction for any interior remodeling. I will definitely use him again - without hesitation."

Recommended by100%of homeowners

Request Quote

Anderson Handyman Services

4.8(

)

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+4 more

Serving Marcus, IA and surrounding areas

In business since 2017

Free estimates

"Jared was on time. It was a little cool for painting the porch but he power washed the deck. Came back later and did 2 coats to the deck floor and 1 coat to the railings and lattice. He is very quiet, works constantly. He always cleans up any mess."

Response time1 day

Recommended by100%of homeowners

Gazebo or Freestanding Porch - RepairInterior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair

Serving Marcus, IA and surrounding areas

In business since 2024

Free estimates

Credit card accepted

"KYLE WAS QUICK AND EFFICIENT KNOWLEDGEABLE PROFESSIONAL AND RESPECTFUL FAST RESPONDING OVERCOMING VERY CHALLENGING OBSTACLES!! EXTREMELY PATIENT WHEN I ASKED A MILLION QUESTIONS! FOCUSED ON ALL MY WANTS AND NEEDS GAVE ME A FREE QUOTE. WENT ABOVE AND BEOND TO HELP ME WITH MY DREAM GARDEN AND NOW BEAUTIFUL YARD! I DONT THINK I COULD HAVE FOUND ANYONE MORE PERFECT FOR THE JOB! MY LAWN LOOKS ABSOLUTELY AMAZING! IF I COULD GIVE 10 STARS I WOULD!!!!"

Response time2 days

Recommended by50%of homeowners

Request Quote

Showing 1-10 of 48

Woodworking questions, answered by experts

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

Board and batten is a type of wainscotting that uses wider boards that are placed vertically, and it has a much more rustic aesthetic than wainscotting. Common wainscotting styles are raised-panel, flat-panel, and beadboard. Wainscotting is more intricate and will typically use more elegant, subtle trims compared to the more farmhouse-inspired boards of board and batten styles.

On average, the cost to hire a carpenter ranges from about $75 to $100 per hour, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.

Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don’t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi’s contractor licensing tool to find out whether a potential carpenter is licensed in your state.

The Marcus, IA homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.