Get matched with top sonic cleaning pros in Griswold, IA

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

Yes, algae-resistant shingles will prevent algae and moss growth, providing double protection for your roof and roof flashing. The copper-infused granules on algae-resistant shingles release copper ions that inhibit plant growth in general, so moss will have a harder time growing on your roof, too. Keep in mind that copper ions flowing off your roof during rainfall can also inhibit plant growth below, so your gardens and grass may be affected.

To keep your PVC roof in top condition, keep it clear of debris, ensure drainage systems are working properly, and inspect it for damage regularly. Keeping the roof clear of ponding water, sharp debris, and other hazards will prevent damage. Have your roof inspected by a professional once a year to ensure the seams aren’t damaged or separated—faulty seams can lead to destructive water intrusion.

For the best chemicals to clean a metal roof, stick to gentle detergents such as dish soap, laundry detergent, or car-wash soap mixed in a diluted solution of ¼ cup of soap to 1 gallon of water. These mild cleansers are safe for most roof finishes but are still strong enough to remove remaining dirt particles. Chemicals like bleach or acids can damage your roof, poison landscaping and grass, and pose a hazard to you and your family. If your roof is very dirty or you think it requires chemical cleaning, call a roof cleaning professional.