Q: Which types of gas pipes are more susceptible to leaks?

• <div><p>Any gas pipe can leak, especially if it&rsquo;s old or isn&rsquo;t properly maintained. However, even with a shovel, plastic pipes are more easily damaged by impact. That&rsquo;s why it&rsquo;s so important to have gas lines marked by the utility company before you begin digging for any reason. Some metal pipes, like black pipes, galvanized steel, and copper, aren&rsquo;t as easily damaged by impact but can degrade over the years, leading to leaks. </p></div>

Question 1

How long does it take to install a gas line?

Accepted Answer

•

Installing a gas line is no simple task. From start to finish, you’re looking at anywhere from six to 12 weeks to acquire the correct permits, dig a trench, and connect your appliances. Naturally, the longer the gas line, the longer it will take to complete. If your plumber needs to hire additional contractors to dig trenches and navigate around or remove obstacles, this could put you at the longer end of the timeframe.

Once the land is prepped and licenses acquired, installing the actual line may only take a few days to a few weeks, weather permitting.

Question 2

Which types of gas pipes are more susceptible to leaks?

Accepted Answer

•

Any gas pipe can leak, especially if it’s old or isn’t properly maintained. However, even with a shovel, plastic pipes are more easily damaged by impact. That’s why it’s so important to have gas lines marked by the utility company before you begin digging for any reason. Some metal pipes, like black pipes, galvanized steel, and copper, aren’t as easily damaged by impact but can degrade over the years, leading to leaks.

Question 3

How are propane tanks professionally installed?

Accepted Answer

•

Propane tanks are professionally installed by assessing the site for safety, placing it correctly, connecting it securely, and ensuring compliance with safety regulations.

Question 4

How much does a gas fireplace increase your gas bill?

Accepted Answer

•

The effect a gas fireplace has on your gas bill will depend on how often you use it, the size of the rooms you’re heating with it, and the BTUs of the fireplace itself, but generally speaking, it should only cost a few cents an hour to run it when it’s on. It will consume minimal energy when it’s “off” if you have a pilot light running constantly, but some modern gas fireplaces don’t require a constant pilot light.

Question 5

Who installs or runs gas lines?

Accepted Answer

•

Plumbers typically install gas lines. When hiring a plumber, you should make sure that they have the proper licenses and credentials. While you can hire any plumber to complete this task, you may consider hiring a natural gas line plumber who specializes in moving gas lines. They’ll have extensive experience completing similar projects.