Get matched with top pool table assembly pros in Fort Stewart, GA

Yes, you will need building permits for an inground pool, and your pool installation company should pull them for you. The permit filing fee will usually sit between $400 and $1,800, and it should appear on your contract or invoice. You may want to confirm with your contractor that they will pull all necessary permits. You might also need a permit for a new fence, as many municipalities have special fencing requirements for properties with pools. A fence permit costs between $50 and $500. This expense may not be included in your pool installation estimate.

Setting up a pool on unlevel ground is not recommended as it can damage the pool or yard and put the safety of those using it at risk. If a pool isn't level, the water's weight won't distribute evenly, putting excessive pressure on certain parts. This can cause the pool liner to tear or the walls to collapse, leading to water damage, expensive repairs, or potential injury to swimmers. It is more cost-effective to level the ground correctly before installation rather than waiting to address serious structural issues later.

An easy way to know whether your sand filter has enough sand is to check how full the filter is and what the sand looks and feels like. The filter container should be two-thirds to three-quarters full of sand. Look for interior marks indicating the ideal sand level. If you put your hand into the sand, it should flow through your fingers without clumping. The filter pressure gauge is also an easy indicator—the right amount of sand leads to normal pressure, while too much or too little sand can cause high or low pressure.

Generally, you do not need to drain your pool to convert it to a saltwater system. The main exception is if you have used an antibacterial agent containing polyhexamethylene biguanide to sanitize your pool, as these sanitation products do not mix well with saltwater systems. If this is the case, you will need to start fresh. You can either drain the pool or treat the existing water with a high dose of chlorine to remove the antibacterial agent. If you choose the chlorine treatment, wait several days to allow the chlorine to work before proceeding with the conversion. If you are unsure whether this applies to your pool, consult a pool technician.