Get matched with top cabinet makers in Eads, CO

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

Building a bathroom cabinet can be cheaper than buying one, especially if you have woodworking skills and tools. The cost of materials can be less than that of a premade cabinet. However, buying a ready-made cabinet might be more convenient and cost-effective if you factor in your time and effort. Custom-built cabinets offer more flexibility in design and materials, while pre-made options provide ease and faster installation.

We recommend installing wall cabinets first so the base cabinets aren’t in the way. This order also prevents damage to the base cabinets if you drop tools or materials when installing the upper cabinets.

There are three primary ways to attach upper kitchen cabinets to a wall, and installers may use more than one method at a time. The most common method is to drive screws through the back of the cabinets and into studs in the wall behind. Sometimes cabinets are glued to the wall with strong adhesive. Often a combination of screws and adhesive is desirable. The last way is by hanging the cabinets on hardware brackets that attach to the wall before cabinet installation.