Get matched with top concrete driveway pros in Earlimart, CA

Combining power and soft washing is a great way to ensure that all surfaces, both fragile and not, get the attention they deserve. Start by power or pressure washing durable materials like vinyl siding and concrete pavement or driveways, then switch the tips on your machine and finish up by soft washing the more delicate elements, like shutters and front doors, for example. 

Does the water in your taps sometimes come out very slowly? If so, you might have problems with low water pressure in your house, and your pressure washer won’t effectively clean. To test if your water pressure is sufficient, time how long it takes for the water from your hose to fill a 5-gallon bucket. Usually, if it takes less than two minutes, you’re good to go.

Deciding whether to buy or rent a pressure washer depends on your budget and how often you plan to use it.

• Renting: The daily rental cost typically ranges from $40 to $175. Renting can be more cost-effective for a one-time project.

• Buying: The purchase price for a pressure washer can range from $100 to over $1,000. More specifically, electric models generally cost between $100 and $400, while gas models run from $300 to $600.

If you anticipate using a pressure washer multiple times a year, buying one is often a better long-term investment. When purchasing, remember that a higher-quality machine will likely deliver better and more reliable results.

Whether you need to winterize your pressure washer depends on where it will be stored. If it's kept in a location where temperatures could drop to freezing, any liquid left in the water pump can freeze, expand, and cause severe damage to the machine. To prevent this, you can add antifreeze to the pump. While emptying the machine with compressed air is an alternative, it can be a tedious process and may not remove all the liquid. If you can store the pressure washer in a relatively warm place with no risk of freezing, you won't need to add antifreeze. However, regardless of storage conditions, it is good practice to empty the gas chamber and refresh the oil before storing it for the winter.