Get matched with top well and pump technicians in Avery, CA

Yes, you can shock a well yourself, but it can be dangerous if you don’t know what you’re doing. We recommend calling a pro, but if you decide to do it yourself, make sure to follow proper safety precautions. This means wearing the correct safety gear, such as rubber gloves, goggles, and boots. You should also mix the chlorine solution in an open area with plenty of ventilation. Also, make sure not to drink or use the water for a few days afterward, until you’ve flushed the system and retested the water.

If you notice any changes to the water coming from your well, consider that a sign to get a well inspection. For example, if the water is foul-smelling, bad-tasting, cloudy, or discolored, you should call a pro. It’s also a good idea to schedule an inspection if you observe a loss of water pressure, broken equipment, loss of well capacity, or other unusual signs.

No, a larger well pressure tank will not increase or improve water pressure on its own. The pressure control on the well pump is what determines the water pressure in your home. However, a larger tank does offer other benefits. It can hold more water, allowing you to run it for longer before the pump needs to turn on. Because the pump cycles on and off less frequently, there is less stress and wear on the well system. This can lead to a longer lifespan for the pump and tank, and you may experience fewer pump-related issues that could affect your water pressure in the long run.

If you want to increase your water pressure, you can try one of the following solutions:

• Adjust the tank’s pressure settings to a higher PSI (pounds per square inch).

• Replace your current pump with one that has a higher flow rate (GPM).

• Install a water pressure booster pump in your plumbing system.

• For pressure fluctuations, consider replacing your current setup with a constant pressure system.

If your well pump gets stuck in its casing, you may be able to free it loose by gently wiggling the line or by vibrations from tapping the line with a hammer. However, if your pump is stuck in a buildup of minerals around the casing, you’ll probably have to call in a well pump contractor to get it out. They’ll likely use a muriatic acid solution—a strong, corrosive acid—to break down the minerals and free the pump loose. 

To avoid a stuck pump in the future, experts recommend a professional well cleaning once every 10 years.