Get matched with top cabinet makers in Eagar, AZ

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

You can stack upper kitchen cabinets, but they may not fit neatly. Because upper kitchen cabinets are typically available in these standard sizes—12, 15, 18, 24, 30, 36, and 42 inches—you can stack various-sized upper cabinets. But, depending on your ceiling height, these standard sizes may not work together. That’s why smaller stacked cabinets are a much more stylish and economical choice.

Buying a kitchen cabinet or finding an experienced cabinet maker is likely going to be your best option unless you have the necessary experience and woodworking skills. If you’re just replacing one cabinet base or one cabinet, making your own is entirely possible and more effective, assuming you have the right equipment.

While most kitchen island installations do not require a permit, some situations do. Any major kitchen renovation will require one, and depending on your municipality, you might also need one if you install new plumbing or electrical work. 

Your kitchen island installation pro will be able to determine if you need a permit for your job, which can run you between $460 and $2,900, depending on the permits required.