Get matched with top stone countertop pros in Cotter, AR

There are several countertop options available to fit your lifestyle and needs. 

• Granite countertops are durable and come in a variety of colors.

• Soapstone countertops are prone to scratches and best in smaller kitchens.

• Marble countertops are less durable than granite but a good option for busy kitchens.

• Slate countertops are stain-resistant, making them easy to clean.

• Limestone countertops must be sealed often to prevent scratches.

• Acrylic countertops cost less than granite while still providing durability.

• Laminate countertops are the most affordable but chip and fade faster.

• Wood countertops need monthly sealing to maintain.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Beyond landscaping, limestone has multiple uses. For example, there are multiple pros and cons to limestone countertops, such as a lower cost compared to other types of stone and heat resistance. Limestone is also a key ingredient in limewash, a type of paint with a chalky texture. Other uses for limestone include siding, retaining walls, and mixed into cement.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.