Get matched with top animal fencing pros in Lapine, AL

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

You can buy wrought iron fencing from a trusted fence installation company near you. You could also opt to buy it privately from a homeowner who is interested in recycling their own wrought iron materials. Manufacturers stopped mass production of wrought iron as steel became more affordable to produce, so you likely won't find it in any local big box stores.

When it comes to materials, wire fences are the cheapest option. The average cost for a 150-foot wire fence is $1,350. The next cheapest material is chain-link, followed by wood.

As far as the style of fence, smaller, less private fences are cheaper than large, elaborate fences that block your whole yard. That’s why split-rail fences are the cheapest option for wooden fences. They cost roughly $10 to $30 per linear foot.

A fence installer or homeowner should place a snow fence upwind of the desired drift area, while keeping the prevailing wind direction in mind. When installing a snow fence, its posts should be sturdy, as they will be the weakest areas in terms of tensile strength. Posts should be buried at one-third their height and placed no more than eight feet apart.