How Much Does Shower Pan Replacement Cost in Charlotte, NC? [2026 Data]

Shower pan replacement costs in Charlotte, NC, run between $876 and $2,238, with the average project totaling $1,576. The shower pan’s size and material will influence how much you pay, but there are other factors to consider, too. Here’s how it all comes together to determine the cost of a new shower pan in Charlotte, NC.

Shower Pan Replacement Cost Factors

Several cost factors come into play when replacing a shower pan in Charlotte, NC, including the pan’s size and material.

Size

Many showers are standard sizes, including 32-by-32 or 36-by-36 inches. Square shower pans for these dimensions cost $145 to $245 and $145 to $585, respectively. If you have a shower-tub combo and the space is 48-by-48 inches, the cost bumps to $195 to $680. Depending on the materials, custom shower pans cost $875 to $1,950 or more.

If you have a spacious single-family home in Eastover, Myers Park, or similar neighborhoods in Charlotte, NC, you likely have enough room for a larger shower (and shower pan). As a result, it will cost more to replace. However, if you’re in one of the city’s many apartments, your bathroom may be more compact—and if so, your shower pan could be smaller and less expensive to replace.

If your shower is not a standard size, you’ll need a custom pan made to fit. The following table breaks down costs by common shower pan sizes.

Materials

Shower pans come in many materials, and the type you choose will have a significant impact on your project costs. You can choose a traditional pan in a muted color or opt for a showstopping design with a luxurious, natural stone pan.

The most affordable type of shower pan is fiberglass, which starts at $145. The costliest options include tiled shower pans, which can reach $3,410.

Shower Installation Pro Costs

When you’re budgeting for a new shower pan, there are two final costs to be aware of: labor and permits.

Labor

If you hire a Charlotte, NC, pro to replace a shower pan, you can expect to spend between $340 and $555 on labor. A typical shower pan replacement should take around four hours, including removing the old pan, waterproofing the area, and installing the new one.

Keep in mind, though: If you need plumbing work in addition to the shower pan installation, the job will take longer—and you’ll spend more on labor. Similarly, certain shower materials (like custom tile) are more time-consuming to install, which will also increase your labor costs.

Permits

You don’t need a permit to replace an existing shower pan in the Queen City. However, if you’re making any changes or additions to your plumbing system, a permit is required. A shower installer in Charlotte, NC, can provide more information about permit requirements and costs, based on the specifics of your project.

Additional Pros to Consider Hiring

Aside from a shower installation pro, you might need to hire other professionals for your project. These could include:

• Plumber: You’ll need a plumber for any type of plumbing work, including changing your shower layout or installing new fixtures. On average, hiring a plumber costs $45 to $195 per hour in Charlotte, NC.

• Flooring pro: If your bathroom floor is damaged or dated, this could be a good time to replace it. In Charlotte, NC, bathroom tile floor installation costs anywhere from $780 to $6,810, depending on the size, tile material, and other factors.

Does Shower Pan Replacement Increase Home Value?

Replacing a wobbly, leaky, cracked, or discolored shower pan can improve the overall look of your bathroom. More importantly, though, a new pan should hold up better against moisture, which reduces the risk of leaks, mold, and water damage.

Planning a complete bathroom renovation? On average, remodeling a bathroom in Charlotte, NC, costs around $12,000, but the return on investment (ROI) will depend on the extent of the remodel.

While the ROI on a midrange bath remodel in Charlotte, NC, is around 71%, it’s just 39% for an upscale bath remodel, according to the Journal of Light Construction (JLC) 2025 Cost Versus Value Report.

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.