How Much Does It Cost to Move Washer and Dryer Hookups in Houston, TX? [2026 Data]

The cost to move washer and dryer hookups in Houston, TX, averages $1,183, and most homeowners pay between $838 and $1,775. Costs largely depend on the distance from existing utility connections, since relocations to walls or upper levels without connections require more time and materials. Many projects in Houston, TX, may also need permits for the various trades involved, which can further influence costs.

Washer and Dryer Hookup Relocation Cost Factors

The cost to move washer and dryer hookups in Houston, TX, depends on the plumbing, electrical, and other utility work needed. Drywall repairs and new appliance installation also impact the final price.

Installing a Washing Machine Cut-Off Valve

A cut-off valve is necessary to stop the water supply to your washing machine. Your washing machine cut-off valve will likely cost $10 to $30 per line.

Building a Drain Line for the Washer

Relocating your washing machine gets trickier when plumbing costs are involved. And one major plumbing cost for relocating your washer and dryer is installing a drain line. Depending on how close it is to the existing plumbing, the price could range anywhere from $355 to $1,815.

If you try to tackle this work yourself and make a mistake, you’ll need to get a plumber in pronto. However, costs will be significantly higher. Emergency plumbing costs up to three times as much as standard plumbing.

Installing Electrical Outlets and Circuits

Your washer should run on a standard 120V outlet, while dryers need a high-powered outlet (240V) for proper power. The cost to install a new outlet and circuit is around $295 if you need one for the washer, and about $495 if you need a 240-volt circuit for the dryer. The type of dryer plug on your unit will impact electrical costs.

Running a Gas Line

If you’re installing a gas dryer, you’ll need to factor in the cost of running gas lines to your new laundry room. Prices vary, but the cost for a new gas line typically falls between $195 and $4,930 or more, based on how far you run the lines. Expect to pay around $20 per linear foot. You also may need to cap an existing gas line, which costs around $125.

Dryer Vent Installation

Dryers need a place to push out that hot air, so don’t forget to consider installing a dryer vent. A new dryer vent costs an average of $100 but can reach $985 depending on the length of the vent.

Repairing Drywall

After you finish installing new hookups, you’ll likely have some minor drywall repair needs. Minor drywall repair can cost as little as $100, and your plumber or electrician may even include it in their labor cost. Sometimes, when moving your washer and dryer, you’ll uncover mold or water damage that needs further attention. In these cases, it’s best to call a mold remediation pro to test and suggest the best course of action.

Installing the New Machines

Once you’ve set up everything, you’ll have to think about installing the units and moving the washer and dryer. If you’re buying new units, many will include installation in the cost. If that’s not the case, you can find an appliance installation service near you and get it done for about $50 to $175 per unit.

Washer and Dryer Hookup Pro Costs

Costs to hire a local appliance pro in Houston, TX, to move washer and dryer hookups depend on labor rates, permits, and additional trades involved.

Labor

Local plumbers and appliance pros in Houston, TX, charge $45 to $200 per hour to move washer and dryer hookups. You might pay a flat fee if your job is simple, such as relocating the hookups to a wall with existing utility connections, but more complex projects with significant modifications may require an in-person assessment to determine a custom quote. You’ll also likely pay higher rates if your project requires a plumber with advanced certification or involves gas line work.

Permits

Moving washer and dryer hookups usually requires obtaining a permit from the City of Houston Public Works Department. Permits for plumbing work start at about $100, plus fees for the type of work, inspections, and administrative processes. Relocating laundry hookups frequently requires additional work for electrical, gas lines, or structural modifications, so you may need to plan for extra fees.

Additional Pros to Consider Hiring

In addition to plumbers and appliance pros, you may need to hire other tradespeople to complete specialized work when moving washer and dryer hookups:

• Electrician: $45–$95 per hour

• Dryer vent specialist: $90–$125 per hour

• Drywaller: $0.90–$2.25 per square foot

• General contractor: 10%–20% of total project cost

Does Relocating Washer and Dryer Hookups Increase Home Value?

Relocating washer and dryer hookups doesn’t directly increase home value in Tampa, FL, but it can improve buyer appeal. Moving laundry hookups from humid, insulated garages or basements into a more convenient location modernizes your home and improves accessibility. Returns are higher for relocations that are part of laundry room remodeling projects, with about a 40% to 60% return on investment (ROI), since dedicated laundry spaces add to overall functionality.

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.