
Discover the cost to install washer and dryer hookups in Dallas, TX. Learn about price factors, labor, materials, and tips to save on your laundry room project.
Appliance repair costs depend on your project and location. Check with a local pro for your specific job.
The cost to move washer and dryer hookups in Dallas, TX, ranges from $45 to $200 per hour when you hire a local pro.
Relocations to different floors or walls without existing utility lines usually have the highest costs.
Plumbing and electrical work require a permit, which starts at $180.
Hiring a local appliance pro to move washer and dryer hookups ensures your job complies with city code and avoids safety hazards.
The cost to move washer and dryer hookups in Dallas, TX, averages $1,237. Most homeowners pay between $876 and $1,856, depending on the distance of the new hookups from existing plumbing and power connections. Total prices can be as high as $5,155 if the relocation is on another floor, and homes in older neighborhoods in Dallas, TX, may also need plumbing, gas, or electrical system upgrades for functionality and code compliance.
The cost to move washer and dryer hookups in Dallas, TX, is based on modifications or upgrades needed for your home’s utilities, drywall repairs, and machine installation.
A cut-off valve is necessary to stop the water supply to your washing machine. Your washing machine cut-off valve will likely cost $10 to $30 per line.
Relocating your washing machine gets trickier when plumbing costs are involved. And one major plumbing cost for relocating your washer and dryer is installing a drain line. Depending on how close it is to the existing plumbing, the price could range anywhere from $370 to $1,895.
If you try to tackle this work yourself and make a mistake, you’ll need to get a plumber in pronto. However, costs will be significantly higher. Emergency plumbing costs up to three times as much as standard plumbing.
Your washer should run on a standard 120V outlet, while dryers need a high-powered outlet (240V) for proper power. The cost to install a new outlet and circuit is around $310 if you need one for the washer, and about $515 if you need a 240-volt circuit for the dryer. The type of dryer plug on your unit will impact electrical costs.
If you’re installing a gas dryer, you’ll need to factor in the cost of running gas lines to your new laundry room. Prices vary, but the cost for a new gas line typically falls between $205 and $5,155 or more, based on how far you run the lines. Expect to pay around $15 to $25 per linear foot. You also may need to cap an existing gas line, which costs around $130.
Dryers need a place to push out that hot air, so don’t forget to consider installing a dryer vent. A new dryer vent costs an average of $100 but can reach $1,000 depending on the length of the vent.
After you finish installing new hookups, you’ll likely have some minor drywall repair needs. Minor drywall repair can cost as little as $100, and your plumber or electrician may even include it in their labor cost. Sometimes, when moving your washer and dryer, you’ll uncover mold or water damage that needs further attention. In these cases, it’s best to call a mold remediation pro to test and suggest the best course of action.
Once you’ve set up everything, you’ll have to think about installing the units and moving the washer and dryer. If you’re buying new units, many will include installation in the cost. If that’s not the case, you can find an appliance installation service near you and get it done for about $50 to $175 per unit.
The cost to hire a local appliance pro in Dallas, TX, to move washer and dryer hookups depends on labor rates, permit and inspection fees, and additional trades involved.
Local plumbers or appliance installers in Dallas, TX, charge $45 to $200 per hour, with higher rates for contractors with more experience and a higher licensing level. Projects with clearly defined scopes may have a flat rate, while more extensive repiping and drainage modifications usually necessitate an in-person evaluation and custom quote. Plumbers who also modify gas lines to bring your washing and drying machine hookups up to current Dallas, TX, building codes will also likely have above-average rates.
Moving washer and dryer hookups usually requires a permit in Dallas, TX, since these projects typically involve relocating water supply and drain lines, adding new circuits, and other significant work that falls under the city’s building and mechanical codes. The total cost for permits depends on the specific trades involved, the distance your utilities must be extended, and the project’s total value.
The base permit fee in Dallas, TX, is about $180, with an extra $100 per additional trade, plus fees according to the project’s value. Inspection fees are $125 per trade.
Relocating washer and dryer hookups often requires multiple trades, since these appliances will likely need new plumbing and power connections. Depending on the project details, you may need to hire additional professionals, such as:
Electrician: $50–$100 per hour
Dryer vent specialist: $100–$200 per hour
Drywaller: $1.85–$2.45 per square foot
General contractor: 10%–20% of total project cost
Relocating washer and dryer hookups in Dallas, TX, doesn’t directly increase home value, but it can boost your home’s appeal. Moving the laundry to a dedicated interior space is a significant upgrade for convenience and also improves accessibility, helping to make your property more competitive. If relocating washer and dryer hookups is part of a laundry room remodel, you can expect a 40% to 60% return on investment (ROI).
To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.
Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
Excellent small appliance repair service. The technician quickly identified the problem and fixed it efficiently. They were professional, courteous, and explained everything clearly. My appliance is working like new again, and the entire process was smooth from start to finish. Highly...
Decided to take a chance on this new company to remove kitchen appliances that were taking up space in my garage. This is a veteran owned, second generation enlisted Navy business. The prices were fair and the service prompt. Aaron picked up the items and took them to their donation...
Called American Contractor Near Me LLC, Saturday night, and the technician was at my door first thing in the morning. He inspected and repaired my A/C in minutes. The price was reasonable, especially for a Sunday morning. Will call them again for any repair work and maintenance needed in the...
Five-star service from Green City Pros for AC repair! Technician Jimmy was friendly And got the job done swiftly.
Our siding is a bit old but still not old enough for replacement so we hired this company to repair the damaged areas.They were highly professional, on time, and got the work done fast., if you need any siding repair done,they are definitely the ones to go to!!!
Lindley Foundation Repair LLC did a great job, was done on time and the work is stunning! The communication with this Team was outstanding! We would use them again and again and again!
Professional, punctual, accurate and effective repair!
Excellent work and extremely pleasant person did our repair
I ended up doing the repairs myself. But the customer service from Ergeon was top notch! I was educated about prices, wood quality and permits! I really appreciated their service since they were very professional!
Very professional service. The technician who cleaned our ducts was excellent, he repaired our system perfectly. Thanks again for the great work. I will definitely ask them to come back and clean my place again in the future. Thanks!
From average costs to expert advice, get all the answers you need to get your job done.

Discover the cost to install washer and dryer hookups in Dallas, TX. Learn about price factors, labor, materials, and tips to save on your laundry room project.

Read our tips to understand the key factors involved in dryer vent cleaning costs in Dallas, TX, including vent length and where it's located.

The cost to relocate washer and dryer hookups varies based on location, as well as whether your moving the appliances and adding new hookups. We’ve compiled a full price breakdown here.

Finding the right pro to install your new washer and dryer will help the machines work better, last longer, and ensure everything is connected correctly.

The best option for who to hire to relocate a washer and dryer is a washing machine repair pro, but you also may need an electrician, plumber, and contractor.

Looking for a new washer or dryer to keep your clothes fresh and clean? Learn how to choose a washer and dryer by knowing what to consider.