How Much Does It Cost to Pressure Wash a House? [2025 Data]

The average cost to pressure wash a house is $310, but you could pay between $100 and $700, depending on the size of your house, its location, and other factors. Small areas—like driveways and patios—will be on the lower end of that range, while pressure washing an entire home will cost much more.

Cost to Pressure Wash a House Per Square Foot

Pressure washing costs $0.10 to $0.50 per square foot, depending on what part of your property you’re cleaning. Flat, easily accessible surfaces like driveways and patios take less effort and therefore come with lower prices.

Note that pressure washing a small area means that a technician is spending little time at your home, despite having to pay for gas, insurance, and all other overhead costs. For this reason, pressure washing costs less per square foot when you give a professional more to do.

Here’s how much it might cost to pressure wash a 1,500 square foot house, 2,000 square foot house, or 2,500 square foot house:

Cost to Pressure Wash by Project Type

You might not always pressure wash your actual house. Several other areas on your property could benefit from a thorough cleaning, including your driveway, patio, fence, and more. 

Here’s the average pressure washing cost for different parts of your property: 

Driveway

Driveways are one of the most popular choices for pressure washing, as they tend to accumulate grime quickly due to car and foot traffic. Overall, the cost to pressure wash a driveway falls between $100 and $500 and sits at an average of $100 to $250, depending on the size and the amount of work it takes. This often breaks down to $0.20 to $0.40 per square foot. Driveways with lots of motor oil accumulation require pressure washing with bleach or a less abrasive cleaning solution, as well as more labor. 

Patio or Deck

To have a professional pressure wash a deck or patio, you’ll pay $100 to $200. Costs depend on the size of the patio, the material, and the ease of access. If a technician has to deal with stairs or obstructions—or if they need to reduce pressure to avoid damaging the surface—you’ll pay more for the added time and effort.

Fence

The cost to pressure wash a fence is $150 to $300. Your price will depend on the length of the fence and material type. Wood fences take longer than PVC or metal fences because pros must use less pressure and more care to avoid damaging the wood.

Gutters

You’ll pay $0.50 to $1.50 per foot for a tech to pressure wash your gutters, so a single-story house costs between $50 and $150. If you have a taller home, your technician will need a ladder or a bucket truck to reach and clean the gutters, which will add to the cost of your project.

Roof

The cost to pressure wash a roof is higher than other projects. Due to the difficulty, you’ll pay $0.50 to $1.00 per square foot, or between $450 and $700 overall. Getting equipment onto the roof and navigating the sloped terrain is harder, which requires safety equipment.

Siding Only

Many homeowners find that simply pressure washing their siding can significantly affect the building’s overall look. For this simpler project, you’ll pay anywhere from $150 to $1,400 on average, though this price can climb upwards of $2,500 for large projects, depending on how much siding needs cleaning.

Pressure Washing Cost by Number of Stories

The cost to pressure wash your home also depends on the number of stories. If your home is two or three stories, the professional likely needs a ladder, scissor lift, or bucket truck to complete your project—all of which can increase your costs.

Here’s how much you’ll pay to pressure wash your home based on number of stories:

Cost to Pressure Wash by Material

Your house’s materials can also influence the overall cost of pressure washing. This is because certain materials require special cleaning techniques, which may take longer (and cost more in labor).

Here’s how pressure washing costs are influenced by house material: 

Brick

Even though brick is a durable material, it requires careful washing. A pressure washing pro will follow certain practices to avoid damaging the mortar or discoloring the masonry. On average, it costs $0.10 to $0.40 per square foot to pressure wash brick.

Stucco

Cleaning stucco also requires a gentle approach. It takes time to remove dirt and grime from around the ridges. You’ll pay a pro between $0.30 and $0.50 per square foot to pressure wash stucco.

Wood

Wood’s porous nature also makes it trickier to pressure wash. To prevent damage, professionals often need to soft wash wooden siding, fences, and decks. You’ll pay between $0.30 and $0.55 per square foot to pressure wash wood.

Vinyl

Vinyl can withstand more water pressure than many other materials, including stucco and wood. However, your pro will still use specific techniques to not crack the vinyl. Pressuring washing this type of material costs $0.20 to $0.50 per square foot.

Cost to Pressure Wash by Location

Where you live significantly affects how much you’ll pay to pressure wash your home. Here are some pressure washing cost ranges throughout the United States:

Pressure Washing vs. Power Washing Cost

Though pressure washing and power washing are often used interchangeably, they vary in method and cost. The table below outlines the key differences:

How Often Should You Pressure Wash Your House?

You should aim to pressure wash your home once per year, and the best time is between March and November in most areas. These months rarely have temperatures that dip too low, which risks freezing the water or damaging the machines. That said, demand is higher in the spring and summer, so you could experience longer wait times for a professional to come (and possibly higher costs).

Here’s how often you should pressure wash different areas of your home:

Why You Should Hire a Pressure Washing Pro

Almost the entirety of the cost of hiring a professional for pressure washing services will go toward labor, which means you stand to save an average of over $300 if you DIY. However, it’s important to have a solid understanding of what pressure to use on different materials to avoid damage, as well as what areas you shouldn’t pressure wash to avoid leaks. Hiring a power washing company near you to get the job done is well worth the small investment.

Here’s why it’s ideal to hire a pressure washing pro

In theory, pressure washing a house is a simple and straightforward task, but in practice, there are a few important upsides to hiring a pro you should consider:

• Professionals know what pressure to use on different materials to prevent damage to siding, roofing, and more.

• Pros can often point out issues with rotting wood, damaged fascia boards, and other materials that require repair that a DIYer might miss.

• DIY mistakes can lead to damage to siding, window frames, and door frames, as well as water leaks if you accidentally damage window and door seals.

• Professionals are more likely to get an even clean that maximizes curb appeal and home value.

How You Can Save Money While Pressure Washing

When hiring a pressure washing company near you, the following tips can help save money.

• The price per square foot often decreases when you have a larger project. As such, consider scheduling a “bulk” pressure washing of several areas of your property, such as your driveway, patio, and siding. 

• Get quotes from at least three contractors to find the best price.

• Schedule pressure washing during the off-season, like early spring or late fall, when prices might be lower.

• Regularly maintain your property to prevent the buildup of heavy dirt, grime, mold, and mildew. This might eliminate the need for an expensive deep clean. 

• Consider tackling smaller or more straightforward projects yourself, making sure to follow all safety guidelines. Save on pressure washer rental costs by going in with a friend or neighbor.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We’ve surveyed over 30,000 real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.