How Much Does a Patio Cost to Install in Dallas? [2026 Data]

Patio service costs depend on your project and location. Check with a local pro for your specific job.

Get quotes from patio pros near you
No obligation · 100% free
Get quotes from patio pros near you
No obligation · 100% free
Cost Insights
  • A standard concrete patio in Dallas costs $7 to $13 per square foot.

  • Premium pavers run $10 to $25 per square foot, depending on material and complexity.

  • Custom patio covers can reach $10,000 to $30,000 or more.

  • Concrete and hardscape contractors charge $40 to $80 per hour.

  • Homebuyers may recover 50% to 80% of patio project costs at resale.

In Dallas, Texas, outdoor living is a year-round way of life. Installing a new patio in Dallas costs an average of $2,905, with most homeowners spending between $1,691 and $4,241, depending on size, material, and site conditions. Dallas's cost of living runs close to the national average, keeping labor and material costs in the mid-range compared to coastal metros. Understanding what drives patio costs in Dallas means understanding both the climate and the ground beneath your feet.

Patio Cost Factors 

Several variables shape the total cost of a patio installation in Dallas, Texas. The city's clay soils and hot summers factor directly into what homeowners actually pay here.

Size

Patio installation in Dallas costs as little as $7 per square foot for a basic unreinforced concrete slab on a flat, accessible lot, and up to $35 per square foot or more for a premium natural stone installation with custom finishes. Naturally, the bigger the patio, the more it will cost. 

Leaving at least three feet of clearance around outdoor furniture ensures comfortable circulation, and in a market where outdoor entertaining is a near-universal lifestyle feature, sizing your patio for realistic peak use pays dividends both in daily enjoyment and at resale.

Here’s how patio size influences the average installation cost:

Patio SizeSquare FootageAverage Cost
Small49$400–$2,500
Medium144$750–$7,200
Large400+$2,000–$20,000

Materials

When you build a patio in Dallas, material selection is one of the biggest cost drivers. Concrete is the most popular and most affordable option in the Dallas market, running $7 to $13 per square foot for a standard reinforced slab. Exploring the full range of concrete finishes for patios can help you find a surface treatment that adds aesthetic value while building in the seal protection that helps Dallas concrete last. 

Pavers cost $10 to $25 per square foot, depending on material type and installation method. Dallas homeowners increasingly recognize that their modular format provides a meaningful practical advantage on clay soils, since individual units can be re-leveled or replaced without tearing out an entire slab. 

Take a look at how patio material affects the installation cost:

MaterialAverage Lifespan (Years)Average Cost per Sq. Ft.
Pavers25–35$10–$25
Concrete30–50$7–$13
Stamped concrete30–50$10–$18
Gravel50+$1–$4
Stone/flagstone40–50$20–$35

Demolition

Budget between $2 and $6 per square foot for demolition of an existing concrete patio in Dallas. Paver demolition runs $4 to $9 per square foot. Dallas's clay soil movement is a leading cause of patio surface failure in older DFW homes. Consider hiring a local concrete removal professional if you’re replacing old slabs that have seen better days. You’ll likely save money by asking your contractor to include this work in the new patio installation.

Removing an old patio yourself is worth considering if you’re on a tight budget. It isn’t a DIY task that requires complex technical know-how, but it’s still labor-intensive.

Site Prep

Patio site preparation in Dallas is often more involved and more expensive than in other major U.S. markets. Dallas sits on Blackland Prairie clay, one of the most expansive soil types in the country. Standard site prep on a flat, accessible Dallas lot runs $500 to $1,500, covering excavation, grading, and installation of a compacted aggregate base. On sites with poor drainage, significant tree canopy, or difficult access, site prep costs can rise substantially.

Pooling water on the surface of your new patio can lead to costly water damage and shorten your patio’s lifespan. That’s why it’s essential to level the ground properly before pouring concrete or laying pavers. We strongly recommend that you hire a professional to properly grade the land, make any necessary drainage modifications, and prepare the substrate.

Shape

Different types of patios come at different costs, and custom patio shapes push your budget higher than standard rectangular layouts in Dallas. Curved, multi-level, and pool-adjacent patio designs are extremely popular throughout the DFW market. 

Pavers are a great option for curved or circular patios because you can arrange them without much customization. Still, costs will increase because the pavers need to be cut to the proper shape. Always confirm that any custom shaping, pool integration, or multi-level design is captured in your contractor's base estimate rather than added as a change order once work begins.

Ground Level vs. Elevated

The DFW metro's predominantly flat terrain means that elevated or structural patio installations are uncommon in most neighborhoods. Patio installation costs are significantly higher for elevated patios because they’re more complex to build. Where they do occur, raised patios cost $10 to $35 per square foot more than a comparable ground-level installation. For a 10-foot-by-10-foot patio, that premium can add $1,000 to $3,500 or more to the total project cost. 

For most Dallas homeowners on standard suburban lots, a well-prepared ground-level patio is the most practical, most cost-effective, and most common choice.

Patio Covers

An uncovered patio in Dallas is practically unusable during peak summer afternoons, which is why covered outdoor structures are one of the most consistently requested features in the DFW market. A basic attached wood pergola runs $28 to $35 per square foot, installed. A larger or more custom patio cover installation costs $10,000 to $30,000 or more, especially if it includes features such as ceiling fans, lighting, and misting systems. 

For homeowners weighing the full spectrum of enclosed and open options, diving into the pros and cons of lanais vs. patios helps clarify how different structure types compare in cost, function, and year-round usability.

Drainage

Dallas's Blackland Prairie clay expands when wet and contracts when dry, and the resulting shrink-swell cycle exerts forces on concrete slabs and paved surfaces that no amount of surface reinforcement can fully counteract. The solution is a patio base that maintains consistent moisture levels and prevents water from pooling beneath the slab. 

Experienced Dallas contractors address this with a properly sloped surface, a well-drained compacted aggregate base, and, on challenging sites, French drain systems or yard grading work that costs $500 to $5,000 or more, depending on the scope of the drainage problem. 

Patio Pro Costs

Dallas's construction labor market is active, competitive, and well-supplied with experienced concrete and hardscape contractors. When you're ready to start collecting estimates, touch base with experienced Dallas patio pros who understand DFW clay soil conditions, City of Dallas permitting requirements, and the structural standards that make a North Texas patio durable rather than just decorative.

Labor 

Patio contractors in Dallas charge $2 to $5 per square foot for installation labor on standard concrete work, with paver and stone installations costing more due to the additional material handling, precision cutting, and pattern setting required. Experienced concrete and hardscape contractors charge $40 to $80 per hour. Projects involving premium stone, complex drainage systems, pool integration, or an attached patio roof cost more.

Additional Pros to Consider Hiring

Some Dallas patio projects require additional specialized trades beyond a standard concrete or paving contractor. Outdoor electrical work requires a licensed electrician and is often subject to a separate electrical permit. Gas line installation for outdoor kitchens, fire pits, or fire features requires a licensed plumber and their own trade permit. Landscape architects and irrigation contractors are commonly involved in larger Dallas projects.

For complex multi-trade projects, a general contractor who manages subcontractors, coordinates permits, and ensures that drainage, structural, and aesthetic elements are designed to work together is often worth the added coordination cost. 

Permits

Ground-level patios that do not involve structural attachment or roof structures may not require a permit in Dallas. Patio covers, structural attachments to the home, and electrical or plumbing work usually require permits through the Dallas Building Inspection Department. The minimum permit fee is around $100, and fees increase with project valuation. 

Contractors performing permitted work are responsible for pulling permits, scheduling inspections, and obtaining a final approved inspection. 

Property Taxes

If you’re installing a concrete patio or using another material that your municipality deems a “permanent foundation,” consider the impact it will have on your property taxes. The total increase in taxes isn’t going to be enormous, but plan on spending a bit more over time on any patio that bumps up your taxes.

Does a Patio Increase Home Value?

In the Dallas real estate market, buyers expect usable outdoor living space as a baseline home feature. Professionally installed patios in Dallas yield a return on investment (ROI) of 50% to 80%, with covered patios and premium designs potentially reaching the upper end of that range. 

A patio that is well-covered, well-lit, and outfitted for year-round use translates directly to perceived value for Dallas buyers. A well-designed covered patio with ceiling fans, quality pavers or stamped concrete, and integrated lighting signals move-in-ready outdoor living that buyers can enjoy immediately, particularly in competitive suburban neighborhoods where buyers are comparing finished listings side by side.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.

Need professional help with your project?
Get quotes from top-rated pros.

The homeowners guide to patio services

From average costs to expert advice, get all the answers you need to get your job done.