Find out how much it costs to refinish your porcelain sink and the factors that influence the final price to make it look like new, including size, type, and labor.
Bathtub Refinishing Cost in Minneapolis [2025 Data]
Normal Range: $349 - $560
Most homeowners spend about $454 to refinish a bathtub in Minneapolis, Minnesota. Depending on the material, size, and type, prices range between $349 and $560. A bathtub refinishing pro can walk you through the process.
How we get this data
Getty Images 613765106 / iStock Photography / Getty Images Plus / Getty Images
Getty Images 613765106 / iStock Photography / Getty Images Plus / Getty Images
Highlights
Installing a bathtub liner is significantly more expensive than other options, such as an inlay or reglazing, in Minneapolis.
Bathtub refinishing pros in Minneapolis don’t need to be licensed contractors if the job only requires a single skill.
If you’re remodeling a bathroom, refinishing a tub is a budget-friendly task with a high ROI.
A stained, cracked, or chipped bathtub can be an eyesore in your bathroom, but a new one isn’t always in the budget. However, you can refinish your tub for much less than it costs to remove it and replace it. Bathtub refinishing costs in Minneapolis fall between $349 and $560, with projects averaging $454. A bathtub refinisher can assess your tub and provide an accurate estimate.
Bathtub Refinishing Cost Factors
The total cost to refinish a bathtub in Minneapolis, Minnesota, primarily depends on the bathtub material and the tub’s current condition. It also depends on the size and the refinishing method.
Bathtub Refinishing Costs by Material
The type of tub matters when budgeting for a refinishing job. There are four main types of tubs: fiberglass, porcelain, cast iron, and enamel. Here’s a breakdown of bathtub refinishing costs based on tub material:
Fiberglass: Fiberglass bathtubs are the most costly to refinish, at $300–$1,000. This finicky material requires more maintenance and takes longer to get a smooth finish.
Porcelain: A porcelain tub is made from a thin layer of porcelain over cast iron or steel. Older tubs made entirely of porcelain need professional maintenance. Refinishing a porcelain tub costs $350–$600, and antique claw-foot porcelain tubs cost $500–$1,200.
Cast iron: Like a porcelain tub, refinishing a cast-iron tub costs about $350-$600. Before fiberglass tubs, cast iron was the standard tub material. With proper care and maintenance, a cast-iron tub can last 100 years or more.
Enamel: Enamel is a coating made from porcelain or hard glass and is found on steel and cast-iron tubs. Refinishing an enamel coating on a tub averages $350–$600.
| Bathtub Material | Average Cost Range | Pros | Cons |
|---|---|---|---|
| Fiberglass | $300–$1,000 | Removes imperfections, extends lifespan | Can peel or chip without proper installation |
| Porcelain | $350–$600 | Durable, common material | Prone to scratches and chips, may need to be refinished more than once |
| Antique porcelain | $500–$1,200 | Brings life back to tubs in historic homes | High cost |
| Cast iron | $350–$600 | Extreme durability, strongly adheres to the finish | Increased labor costs |
| Enamel | $350–$600 | Used on steel and cast-iron tubs for a glossy look | Chips or cracks can lead to rust |
Bathtub Type
The type of bathtub plays a factor in the overall cost. A general rule of thumb is that the more surface area a tub has, the higher the bathtub resurfacing costs will be.
Inset tubs are the least expensive to refinish because they only have one exterior side, but shower tubs are more expensive due to the wall surface area. Freestanding and claw-foot bathtubs are the most costly due to their deeper interior size and exterior surface area.
| Bathtub Type | Average Cost Range |
|---|---|
| Standard bathtub | $200–$800 |
| Bathtub and shower surround | $600–$1,000 |
| Claw-foot tub | $400–$10,000 |
| Jacuzzi tub | $1,000–$4,000 |
| Freestanding | $2,000–$3,000 |
| Walk-in | $2,000–$8,000 |
| Soaking tub | $600–$13,000 |
| Accessible | $4,000–$12,000 |
Method
The method of bathtub refinishing you choose will significantly impact the cost. For example, installing a bathtub liner costs $2,300 to $7,200. Consider the overall cost, longevity of the repair, and type of damage when choosing the best plan for your tub.
Here are the key differences between a bathtub inlay, bathtub reglazing, and a bathtub liner:
| Bathtub Inlay | Bathtub Reglazing | Bathtub Liner |
|---|---|---|
| $100–$200 | $350–$560 | $2,300–$7,200 |
| Covers the bottom of the tub only | Chemicals include dangerous fumes | Can grow mildew if not fitted correctly |
| Best for small chips or cracks | Best for cracks, rust, and chips | Best option if your tub is beyond repair |
| Can be installed in as little as 30 minutes | Can take 2–5 hours to install | Installs take 1–2 days |
| Permanent | Lasts 10–15 years | Lasts 3–5 years |
Bathtub Refinishing Pro Costs
Labor costs account for a majority of the cost to refinish a bathtub in Minneapolis, but you’ll get a like-new finish and extend the life of your tub. Before you begin this project, also be aware of the licensing and permit requirements.
Labor
The good thing about refinishing your bathtub is that the job takes a relatively short amount of time, so labor costs aren’t too high. Reglazing your bathtub surfaces takes about three to five hours. Speak with a bathtub refinishing pro in Minneapolis, Minnesota, who can give you an estimate.
Licensing and Permits
In Minnesota, contractors are required to be licensed if they work with homeowners and use more than one special skill, such as masonry or roofing. If your bathtub refinishing pro only does this type of work, they may not need to be licensed. Before starting, verify that your pro is meeting all of the necessary requirements to complete this project in Minneapolis.
Bathtub refinishing is mostly cosmetic and doesn’t require structural changes, so it’s unlikely that you’ll need a permit. To be sure, contact Minneapolis Construction Code Services.
Does Bathtub Refinishing Increase Home Value?
Before investing in bathtub refinishing in Minneapolis, consider the return on investment (ROI) you can expect from the project. Refinishing a bathtub is one of the best bathroom upgrades for resale value, with an average ROI of 47%. If you combine this task with other bathroom projects as part of a bath remodel, you’ll see even higher returns.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
The homeowners guide to bathtub restorations
From average costs to expert advice, get all the answers you need to get your job done.
If you’re installing or replacing your shower doors, you’ll be working with a glass installation pro. Here are the most common shower door questions for this project.
If you're looking for an economical way to spruce up your bath or kitchen, here are the bathtub refinishing questions you should be asking a contractor.
The short answer is yes, you can paint a fiberglass tub. But you need the right preparation and paint to transform your bathtub successfully.
Acrylic bathtubs are a common go-to, but are they right for your bathroom remodel? This guide breaks down the pros and cons of acrylic tubs.
There’s really only one solution when the finish starts to peel off. We’ll show the reasons why your bathtub is peeling and how to fix it.