Q: Is a corrugated metal fence less expensive than wood?

• <div><p>If you&rsquo;re looking for a budget-friendly fence material, corrugated metal could be the answer. <a href="https://www.angi.com/articles/how-much-does-aluminum-or-steel-fence-cost.htm">Metal fences cost</a> about $7 to $32 per foot. Aluminum corrugated metal tends to be less expensive than steel. Both options are similar in cost to wood, so, depending on the type of wood you are considering, corrugated metal could be better for your budget.</p></div>

Q: How do you join a silt fence?

• <div><p>When your rolls of silt fence join together, you&rsquo;ll want to overlap them to make sure they&rsquo;re still as effective at keeping water out without requiring fastening together. Overlap two sections of the silt fencing so that two sheets of fabric cover the span of two posts. If you want to fasten them together, you can staple them or use a zip tie, depending on whether your posts are metal or wood. </p></div>

Q: Why should I pick vinyl for my fence?

• <div><p>Vinyl fencing stays popular with homeowners because it&rsquo;s durable and aesthetically pleasing. In addition to offering plenty of privacy, vinyl fences have a life span of <b>20 to 30 years</b> with minimal maintenance. You don&rsquo;t have to worry about these fences warping or rotting due to moisture, and this material doesn&rsquo;t contain toxic chemicals.</p></div>

Question 1

Is a corrugated metal fence less expensive than wood?

Accepted Answer

•

If you’re looking for a budget-friendly fence material, corrugated metal could be the answer. Metal fences cost about $7 to $32 per foot. Aluminum corrugated metal tends to be less expensive than steel. Both options are similar in cost to wood, so, depending on the type of wood you are considering, corrugated metal could be better for your budget.

Question 2

How do you join a silt fence?

Accepted Answer

•

When your rolls of silt fence join together, you’ll want to overlap them to make sure they’re still as effective at keeping water out without requiring fastening together. Overlap two sections of the silt fencing so that two sheets of fabric cover the span of two posts. If you want to fasten them together, you can staple them or use a zip tie, depending on whether your posts are metal or wood.

Question 3

Why should I pick vinyl for my fence?

Accepted Answer

•

Vinyl fencing stays popular with homeowners because it’s durable and aesthetically pleasing. In addition to offering plenty of privacy, vinyl fences have a life span of 20 to 30 years with minimal maintenance. You don’t have to worry about these fences warping or rotting due to moisture, and this material doesn’t contain toxic chemicals.

Question 4

Do I need to inform my neighbor I’m building a new fence?

Accepted Answer

•

Most homeowners don't need to inform their neighbors before constructing a fence, according to the law, but you will need to make sure that you’re building on the property line or on your side of the property line. Otherwise, the neighbor could complain, which would require you to tear down and reinstall the fence. In any case, keeping them in the loop is the neighborly thing to do!

Whether you inform your neighbors or not, always use property records and a land survey to ensure your fence stays within your property boundaries.

Question 5

How do I choose where to add a fence gate?

Accepted Answer

•

To choose where to add a fence gate, know where fence gates shouldn’t go. For example, you should avoid placing gates over low spots on the ground where water can collect and form muddy puddles. Many ranchers install gates at the corner of a fence. Certain gate placements may also be required depending on the type of gate latch you use.