Get matched with top animal fencing pros in Pineville, WV

Installing a picket fence includes measuring and marking the area where you plan to build the fence, laying out all of the materials, digging post holes, setting the posts using concrete, measuring the rails, attaching the rails, attaching the pickets, and then painting or staining the fence if you chose a wooden fence material. 

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

Corrugated metal is a strong, long-lasting material. A corrugated metal fence will typically last several decades, and the metal panels themselves may last for 40 to 60 years. The main thing you should be concerned about is the fence posts. Wood fence posts will last about five years if you purchase them untreated or about 15 years if you treat them after installation. Keep an eye on your posts and look out for insect damage and rot.

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.