Get matched with top pressure washers in Waubay, SD

Power washing asbestos siding can be hazardous and isn't recommended. The power washer's high pressure can disturb the siding and release harmful asbestos fibers into the air. Rather than attempting to DIY it, hire a professional trained in asbestos handling to tackle any exterior cleaning.

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

You could void your roof warranty using a power washer if you have a newer roof. With an older roof, you could knock loose older shingles. On the other hand, some people safely use a pressure washer to remove moss from a metal roof. Although you may want to use a pressure washer, the truth is that you probably don’t need it to knock moss loose. A garden hose and brush will do the job just fine and in a safer manner than a pressure washer.

You should not use a pressure washer on any surface that it might damage. Examples include shingled roofs, glass, electrical components, and anything with a seal that might be stripped away by the pressure. There are a variety of different uses for a pressure washer. They're ideal for driveways, patios, garage floors, vehicles, fencing, gutters, and paint stripping.