Get matched with top welders in Ruffs Dale, PA

The difference between a lintel and a beam is what loads each is responsible for supporting. A lintel is a type of beam that is responsible only for supporting the load above an opening, such as a window or door, and transfers the weight to the side walls around an opening. A beam supports the slab and transfers the load to nearby columns, which then disperse the load to the ground.

A steel beam is stronger than a wood beam and requires fewer vertical supports underneath, which means it’s a better option for larger structures or if you want an open space under your home that doesn’t have posts as obstructions. However, steel I-beams cost more than wood ones, and they can be difficult to install retroactively, as getting them into the basement area can be challenging, if not impossible.

Professional metal fabricators usually charge around $70 per hour. Three of the largest cost factors are the size and complexity of the project and the price of materials. The type of metal can impact the cost as much as the intricacy of the metal fabrication you want done. Another cost factor is your geographic location, as labor and materials can vary widely depending on the cost of living where you live.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

• Metal furniture repair: $35–$100

• Pipe repair: $200–$1,000

• Small gates: $550–$750

• Fencing: $1,200–$1,800

• Fabricated sheet metal welding: $750–$2,500