Costs vary, but you can expect to spend between $1,000 and $4,000 to prepare land for a mobile home or before you build a house. You’ll need to clear enough land for the foundation, which may require leveling or grading, as well as removing trees, stumps, and plants. Don’t forget to plan for permits and fees and the installation of a gas line, water line, and sewer main.
Land survey reports have a boatload of information relevant to several scenarios. Here are the types of information contained with a survey, though it depends on your chosen type of land survey. Exact boundaries and dimensions of a given property General topography, including both natural and artificial landmarks Location of utility fixtures, like water mains Confirmation of any easements or encroachments on a piece of property Assessment of land elevation to buy flood insurance Updated information to add to a pre-existing property map
It is almost always necessary to hire a land surveyor near you to ensure your fence sits on the right side of the property line. Mistaking the shape of your property can lead to fines and costly changes if you have to move or adjust the privacy fence—not to mention some surly looks from your neighbor. We recommend jumpstarting your fence planning in the spring to ensure there is plenty of time to map out your plan before construction season.
Building a road on a slope requires careful planning and will normally require a drainage system underneath to prevent flooding and damage to the road over time. Your professional may lengthen your road to create switchbacks if the slope directly to your home is too steep, as there are regulations for maximum road slope. The drainage system will help prevent runoff from the higher side of the slope from damaging the asphalt or concrete. Keep in mind that building a road on a slope isn’t a good DIY project, as a lot can go wrong.
There are a couple of ways you can determine the depth of your well. One method is to use a device called a well sounder. This tool has a long measuring tape containing a sensor to alert you once the end reaches the water.
Or you can DIY it by using a long tape measure with a half-filled bottle of water attached to it. Lower the tape measure into your well. Once you feel tension on the tape, you’ll know the bottle has reached your static water level. This will give you an approximate idea of your well’s depth.
The Avis, PA homeowners’ guide to land surveying services
From average costs to expert advice, get all the answers you need to get your job done.
Boundary surveys and topographic surveys provide important information about a property. Learn the differences between boundary and topographic surveys.