Is LVL more affordable than steel I-beams?

• <div><p>Yes, an LVL beam is more affordable than the <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">cost of a steel I-beam</a>, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists. </p></div>

Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Leedey, OK

Q: What is the difference between metal casting and metal fabrication?

• <div><p>Metal casting involves creating a prototype and a mold into which metal is poured and allowed to cool and set up. Pieces are cast in molds, making the reproduction of many identical pieces more efficient for larger quantities. Metal fabrication involves creating pieces and welding them together into a larger project, involving more skilled manual labor than metal casting. Fabrication can be more cost-effective in smaller runs but can become less efficient for producing mass quantities of identical pieces.</p></div>

Q: What’s the fastest way to remove rust from metal?

• <div><p>The fastest and easiest way to remove small rust spots from metal is to combine lemon juice and baking soda or borax. You can mix them to make a thick paste, apply the paste to your rusted areas, let it sit for a half hour, and then gently scrub the spots with a bristle brush or old toothbrush. Finally, wipe the area clean with a lightly damp rag.</p></div>

Q: How long does metal fabrication take?

• <div><p>Most projects take 1-4 weeks, depending on material sourcing, design intricacy, and required finishing treatments like powder coating or galvanization.</p></div>

Q: How many metal sheets will I need?

• <div><p>The average roof requires about 17 metal sheets, but that varies according to house size and roof style. Each roofing sheet takes about five minutes to measure and cut, though this depends on your level of experience. If your roof has a steep slope, gables, and skylights, for example, it may require extra sheets to account for waste. Roofs with a steep slope over 3:12 typically require more sheets because the pitch adds extra inches. How much exactly you will need depends on the height versus the width of the roof. If you are unsure of the calculations, check with a local roofing professional.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Leedey, OK?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Leedey, OK

*The Angi rating for Metal Fabrication And Restoration companies in Leedey, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Leedey, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on October 30, 2025

Reviewed in October 2025
I want to compliment David and his crew for doing an excellent job on my new roof. They fixed all the problems quickly and efficiently. David was very polite and made sure a couple of minor mishaps were corrected right away. I would definitely recommend Roof Restore ? especially David?s crew....
Mckeage Industries
Request a quote
Reviewed in December 2021
We are so happy we hired Rustic Oak Metal Shop! They were the nicest people to work with and the finished product was exactly what we asked for and more!
Rustic Oak Metal Shop
Request a quote
Reviewed in March 2021
A wonderful experience hiring OKC Restoration crew to do a fire damage restoration! He kept me informed Everyday the work was exceptional! Highly recommended thanks again!
OKC Restoration
Request a quote
Reviewed in February 2021
With the current cost of lumber, we could rebuild a metal carport cheaper which was our desire. Titan has an ad on the internet that I left my information with and they returned my call within hours. They procured the necessary permits and built the structure in a very timely manner. We would...
Titan Building Co.
Request a quote
Reviewed in July 2017
He didn't clean the pipe he had removed while he was up in attic. I looked inside of it and there was still lint inside the pipe. I used a water hose to do the final cleaning job my self. The flex pipe tape he used to reinstall it with fell off after a few weeks. I noticed it was not tight. He...
All Day Chimney & Dryer Vent
Request a quote
Reviewed in November 2013
We called them and they came out to provide us a firm quote (which few in their business will actually do). The sales person was very professional and knew his business. They worked with us on the date and were flexible in that they allowed us to move half one and half the next. They will give...
Daryl Flood Relocation & Logistics
Request a quote
Reviewed in June 2013
They came and gave me a price, and measured all my windows. Then they sent someone out to see if my old windows had lead paint on them. They did not. I was informed if they had contained lead paint that the installation would take a little longer, because they would have to seal off the rest...
Thermal Windows Inc
Request a quote
Reviewed in April 2013
Here is a detailed account of my experience with Counter Acts countertops in Marietta, OK Tuesday, February 26th – Picked out granite and put up deposit, which we figured at 50% of the estimated square footage. Total to be amended upon actual measurements in a few days. I was told there had...
Counter Act Countertops
Request a quote

Find Metal fabricators and restorers in Leedey

The Anvil Company, LLC

The Anvil Company, LLC

Customers say: Quick response

Recommended by 100% of Angi customers

5 years of experience

We're a locally owned and operated company with over 15 years of industry experience. We value honesty and integrity in all aspects of our business. We offer a variety of Home Improvement services that are customizable to each individual project. We specialize in Metal Fabrication work and a variety of related service and repair projects. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building lasting relationships with our clients and guarantee your satisfaction!

"Howdy Do ? ! This was a rather small ; different task as bracing for 2 trees in back yard & Edom & crew treated it as Important & like it was a Big part of their business & was completed in Superb fashion ! Dave C. OKC"

DAVE C on September 2022

"Howdy Do ? ! This was a rather small ; different task as bracing for 2 trees in back yard & Edom & crew treated it as Important & like it was a Big part of their business & was completed in Superb fashion ! Dave C. OKC"

DAVE C on September 2022

Get matched with top metal fabricators and restorers in Leedey, OK

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Leedey, OK?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Leedey, OK

Find Metal fabricators and restorers in Leedey

The Anvil Company, LLC

The Anvil Company, LLC

Sean Gambrel

Sean Gambrel

Alco

Alco

B & H Industrial

B & H Industrial

Fugate Ornamental Iron

Fugate Ornamental Iron

Kevin Leach Welding & Construction

Kevin Leach Welding & Construction

USA Barn LLC

USA Barn LLC

Kustom Welding and Construction

Kustom Welding and Construction

Treat Metal Stamping, Inc

Treat Metal Stamping, Inc

OK Metals LLC

OK Metals LLC

The Leedey, OK homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Leedey? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Leedey Metal fabrication and restoration services on Angi who specialize in any of these tasks