Get matched with top buffing and polishing pros in Curtis, NE

If you would rather use vinegar to clean the stone fireplace instead of dish soap, this mixture should work fine. Vinegar is slightly acidic, however, so it may etch some kinds of stone without quite a bit of diluting. For a stone fireplace, dilute it to about one cup of vinegar for every gallon of hot water. It’s a smart idea to test the diluted mixture in an inconspicuous area of the fireplace and watch for etching. You can use vinegar to clean quite a few different items around your home, and it’s especially good at removing stains.

Avoid using abrasive cleansing powders on natural stone, as these products could damage the porous material. Using bleach is also a poor idea because of the porosity of the stone. Avoid using a scrub brush with metal bristles, as they could scratch the stone. If you know who manufactured your stone or who installed the fireplace, you may want to contact that entity for any advice on cleaning it safely.

A water-based, low- or no-VOC sealer is typically a good choice for marble countertops. Choose a sealant that is certified safe for contact with food when applying to kitchen countertops. For high-traffic areas, look for formulas that have heat-resistant and acid-resistant features. While there are economical and convenient spray-on sealers, they don’t coat the surface as effectively as the ones you apply with a pad or brush. 

Granite should be resealed every 12 to 18 months, depending on the color and usage. Lighter granite needs to be resealed more frequently than darker colors. If you use acidic cleaners or prepare food on the surface regularly, you must reseal the surface more frequently. Without proper sealing, granite is vulnerable to staining. You can tell if your countertop needs to be resealed by placing a wet paper towel on the counter for 10 minutes. If the water beads up, it is still sufficiently sealed; if it sinks in, it’s time to apply sealant.