Get matched with top fountain pros in Poplar, MT

Algae growth is a common issue for misters, but you can do several things to prevent it. First, use a sealed water tank with distilled or filtered water to fuel your misters. Second, blow out the misters after every use so no water is left in the tubing. Third, thoroughly clean the misting system every several weeks of use at minimum during the warmest months. Third, wherever possible positioning tubing and the water tank away from direct sunlight and in the coolest areas possible.

Pond water should be changed approximately once a week. When you change it, change around 10% to15% of the water. It’s important to monitor the quality of your pond water as this will determine if it needs to be changed more often, or if you should be changing more or less than 15% of it when you do so.

In addition to length and width, pond liners also come in various thickness levels. Thickness is measured in mils, a unit of measurement equal to one-thousandth of an inch, with most pond liners ranging from 15 to 60 mils in thickness. The smaller the number, the thinner (and weaker) the liner. To prevent rips and tears, it’s best to choose a pond liner that’s at least 30 mils thick.

If you’re drinking the water, you can store it indefinitely as long as you properly treat it and your container doesn’t break down. Without any treatment system, you should only leave rainwater in a rain barrel for up to four weeks. If you’re using the water on your garden or lawn, you can store your water until algae start to grow.