Get matched with top fountain pros in Culbertson, MT

Seeps and springs form when groundwater reaches the earth’s surface. The main differences between them are the amount of water and the flow rate. Seeps are smaller than springs and consist of water that’s stagnant or flows slowly. Springs contain more water and flow more quickly.

Algae growth is a common issue for misters, but you can do several things to prevent it. First, use a sealed water tank with distilled or filtered water to fuel your misters. Second, blow out the misters after every use so no water is left in the tubing. Third, thoroughly clean the misting system every several weeks of use at minimum during the warmest months. Third, wherever possible positioning tubing and the water tank away from direct sunlight and in the coolest areas possible.

One of the most important parts of building a pond is digging the right depth. Your pond needs to be at least one to two feet deep. The specifics of the depth will depend on factors such as the placement of the pond and whether you plan on having fish. If you have fish in your pond, it will need to be at least two feet deep.

Even if you empty your pond before the winter, there’s a good chance it will refill naturally. It’s ideal in most cases, then, to leave water in your pond and winterize it instead. This method will prevent ice damage and protect wildlife. Plus, it’ll lessen the steps required to reopen your pond in the spring.