Jefcoat Fence and Access Control

Description of Work: We needed our tall wooden storage fence resurfaced on its existing steel posts and a small shed roof inside one corner replaced. We also wanted the same little upgrade on the outer appearance that we had, rather than the standard plain dog-eared row of fence planks. This was not an elaborate design by any means, as there are many fences around of this slightly more decorative style. When the person came to see our job, he totally understood and took notes and measurements for all parts---fence, shed roof, posts, etc. However, when our estimate came in, they completely ignored what our order was and estimated for just the most common plank fence with none of the features, including the shed or style of fence, which we were willing to pay for mentioned. I felt that they just are in the practice of turning out as many feet of a common product as possible and were not responsible enough to even address what we wanted built.

Description of Work: Take down & haul away 66.6' of 8-ft. fence plus corner post. Replace with 8' board-to-board cedar fence on 4x4 Copperwood posts, taking care to dismantle lattice trellis with trailing plant and reinstall it during construction. Remove & replace 12 random vertical 6-ft cedar face boards on another existing fence and install 42' of vertical 6' cedar face boards as an additional layer. Remove and re-attach all plant hangers on that fence. Adjust bottom iron gate hinge to align gate latch. Nail together existing lattice strips with climbing plants in random fence locations to "shore up."