Get matched with top metal fabricators and restorers in Houlka, MS

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

The average cost to hire a welder is about $300, with an average rate ranging from $65 to $125 per hour, depending on their experience and the project type and size. Aside from labor costs, some other charges you’ll need to pay include the cost of the welding material and the cost of the shielding gas that makes welding possible and safe. When you’re interviewing welders for your work, you can ask for an estimate based on your project specifics. In some simple cases, like welding gas lines or common welding projects, local welders may charge a flat hourly rate with add-ons if necessary.

The average roof requires about 17 metal sheets, but that varies according to house size and roof style. Each roofing sheet takes about five minutes to measure and cut, though this depends on your level of experience. If your roof has a steep slope, gables, and skylights, for example, it may require extra sheets to account for waste. Roofs with a steep slope over 3:12 typically require more sheets because the pitch adds extra inches. How much exactly you will need depends on the height versus the width of the roof. If you are unsure of the calculations, check with a local roofing professional.

Professionally, sheet metal repair involves assessing the damage, cutting and shaping patches, and securing them with welding, riveting, or adhesive methods, depending on the required finish.