Get matched with top fountain pros in Kenduskeag, ME

Seeps and springs form when groundwater reaches the earth’s surface. The main differences between them are the amount of water and the flow rate. Seeps are smaller than springs and consist of water that’s stagnant or flows slowly. Springs contain more water and flow more quickly.

In addition to length and width, pond liners also come in various thickness levels. Thickness is measured in mils, a unit of measurement equal to one-thousandth of an inch, with most pond liners ranging from 15 to 60 mils in thickness. The smaller the number, the thinner (and weaker) the liner. To prevent rips and tears, it’s best to choose a pond liner that’s at least 30 mils thick.

Algae growth is a common issue for misters, but you can do several things to prevent it. First, use a sealed water tank with distilled or filtered water to fuel your misters. Second, blow out the misters after every use so no water is left in the tubing. Third, thoroughly clean the misting system every several weeks of use at minimum during the warmest months. Third, wherever possible positioning tubing and the water tank away from direct sunlight and in the coolest areas possible.

How many fish can call your pond home depends on the volume of the pond and the fish size. Your pond's filtration system also influences the number of fish that will thrive in a pond. A general rule of thumb is to have 1 inch of fish for every square foot in a pond that's 2 feet deep. Another rule of thumb you can follow is to have one koi fish for every 200 gallons of water or two goldfish for every 200 gallons.